[MakCamaro]

Originally Posted by LeonardS

I put the front Rokblokz on my ZLE, because the installation is completely reversible. I wanted no additional holes in the liner or fender. They leave a fairly good amount of tire showing. I wish they were about 3/4” wider. The good part is that they are hardly noticeable. I have not installed the rears, because I don’t see that area being as big a problem as the fronts. I asked Rokblokz about a ZLE specific set that would be slightly wider, but that probably won’t happen.

So, they are confirmed to fit the ZL1? I am asking because on their website they state that they are not confirmed for the ZL1, yet the fact that they are fitted with screws, without the need to drill additional holes and without using sticking tape makes them the ideal choice.

https://rokblokz.com/products/chevro...31480470306859

[LeonardS]

Originally Posted by MakCamaro

So, they are confirmed to fit the ZL1? I am asking because on their website they state that they are not confirmed for the ZL1, yet the fact that they are fitted with screws, without the need to drill additional holes and without using sticking tape makes them the ideal choice.

https://rokblokz.com/products/chevro...31480470306859

Yes, the fronts fit perfectly.

[NYTMARE23]

Originally Posted by #8ZL1Man

That's what I plan as well.

In the past, I've masked of the outside edges, and then sprayed a quick one-coat of black truck bed liner on the inside (facing the tires) before I mounted them. It kept the painted or carbon fiber guards from getting chipped up. (But leave the tape kind of open, and spray on an angle, so you don't get a hard 'line.')

Oh nice!! Well, damn...too late for me since I already mounted mine but that's a VERY good idea you have there!!

[MakCamaro]

Originally Posted by LeonardS

Yes, the fronts fit perfectly.

Great, thanks for confirming that LeonardS. I think they are the best out there and at a great price. I had them on my Mustang and I was very satisfied.

[Cheese ZL1]

Thank you for all the great suggestions!

[MakCamaro]

I ended up going with the Rokblokz ones, as I've used them in the past and I was very satisfied. The area in front of my rear wheels had quite a few rock chips, so I had the paint corrected and then I installed the splash guards. Very happy with the installation, no double sided tape used and no need to drill new holes, so the installation is 100% reversible if needed. Everything was included in the kit they sent me, along with instructions and their customer service is great. One minor suggestion: if you decide to go with the Rokblokz splash guards, be aware that there are 3 spacers per side for the installation of the rear ones. Two of them are 10mm and the 3rd one is 25mm in length. Ask them to replace the 25mm spacer that comes with their kit with a 20mm one, otherwise the rear splash guards will not sit flash with the fender. I ended up replacing the 3rd rear spacer with a 8.3mm x 18mm x 20mm spacer that I bought online. I already informed Rokblokz about that and I suppose they will update their kit for the Camaro. They even sent me several spacers for me to try for free, even though I am in the UK.

All in all I definitely recommend the Rokblokz spalsh guards. They are easy to fit, they require no alteration whatsoever on the car, they stay in place and they look great.

[Cheese ZL1]

I chose the ACS rock guards, looks like they came on the car. In my opinion they are worth the money.

Thanks for all the suggestions/opinions

[NYTMARE23]

Originally Posted by Cheese ZL1

I chose the ACS rock guards, looks like they came on the car. In my opinion they are worth the money.

Thanks for all the suggestions/opinions

Good choice! I love mine and I agree, we'll worth the money!