[BeauRichardson]

Hey guys, i have some issues going on with my trans (A-10) and my converter (Circle D 3600 Stall)
Yesterday when cruising through a school zone my gear indicator light started flashing and when i would give it throttle and it wouldn’t do anything. it would act as if it was in neutral. It did this about 3-4 times within the same mile or so.

Now it has happened before, many times, but it’s usually spread out. usually when pulling into a neighborhood or cruising below 35. But it has never done it that many times in that amount of time.

Mods are Circle D 3600
D1X Procharger
BTR Stage 3 S/C Cam
among other mods that i would think are irrelevant in this situation.

[ctrlz]

The P0700 is generic.
P0741 relates to the torque converter clutch solenoid. it is not disengaging properly and the car is seeing a mismatch of >200 rpm between the torque converter rotation speed and the transmission input shaft.

Check wiring. Was clutch solenoid replaced/rebuilt as part of your mods?
From what I can see the higher stall speed on the new TC should not be the cause of this.

Might start with a call to circle D:
https://www.circledspecialties.com/

[BeauRichardson]

Originally Posted by ctrlz

The P0700 is generic.
P0741 relates to the torque converter clutch solenoid. it is not disengaging properly and the car is seeing a mismatch of >200 rpm between the torque converter rotation speed and the transmission input shaft.

Check wiring. Was clutch solenoid replaced/rebuilt as part of your mods?
From what I can see the higher stall speed on the new TC should not be the cause of this.

Might start with a call to circle D:
https://www.circledspecialties.com/

To the best of my knowledge the solenoid wasn't modified or replaced. If it was, i was not informed by the mechanic that put together my build. I'll definitely be getting in contact with circle d and the shop that put my car together. Thank you

[GhoSStrider]

I’m having the same issue, what did you do to fix it? I’ve already replaced valve body and filled trans to correct level.

[JP374]

Originally Posted by GhoSStrider

I’m having the same issue, what did you do to fix it? I’ve already replaced valve body and filled trans to correct level.

Any updates?

[ctrlz]

Not sure if this will help, but has some detail on the sensors involved. Some kind of Russian repair blog? Get that Lada to the track!
http://zatonevkredit.ru/repair_manua...002kx400wx.xml

[KingLT1]

Might have to set that code to "do not report" in the tune. The TCM can be finicky with higher stall converters due to the increased slip.