[Tyrolblue67]

Beautiful car!
Welcome to the club.
How does it compare to the Grand Sport?
Enjoy!
Tyrolblue67

[arpad_m]

Originally Posted by boss2k

Thanks for the warm welcome and beautiful messages

Couple of newbie questions

1. Finally found how to open the sunroof in tilt position, its the same open button but I need to slightly pinch the outer edge , any millimeter left opens the sunroof, any better way to do this

2. Memory position #2 , can it be set only with key #2 as I read in used manual. I set memory position #1 as I am using key 1 , how do you setup both position using same key if there are multiple drivers

3. With audio ON and not muted how to select a blank source if i don't want to hear music , it keeps going to Radio , am, fm or satellite radio and I mute the Audio to stop listening to anything

1. Sorry, I don't have a sunroof in the Camaro, but it works intuitively in our other GM vehicles: hold the button down to advance to the next "stop" in the selected direction but no further.

2. You can set all 3 positions with any key, and then recall them manually. However, the auto memory recall feature (that adjusts the seat without you doing anything when you hit the start button) is understandably bound to a key fob, the car has no way of knowing who's driving if they use the same fob.

I have the comfort options set up so the driver seat automatically moves to the exit position on opening the door, then it automatically moves to the #1 or #2 saved position depending on the fob used when driving it the next time. I use fob #1 and my wife has fob #2. When both fobs are in the car, it defaults to the last one used. As a result, I almost never have to adjust the seat or the side mirrors, it's always perfect for the driver.

3. Traditionally, there is no such thing as "radio off" on GM cars, at least not the ones we've had, including the Camaro. If the infotainment system is on, you hear music from the currently selected source, be it AM/FM, XM, media, USB etc. The only way you can use the infotainment without music is indeed muting the audio or manually setting the volume to 0.

[Smokin19]

Congrats welcome, nice color it grows on me.

[DamonZ28]

Originally Posted by boss2k

3. With audio ON and not muted how to select a blank source if i don't want to hear music , it keeps going to Radio , am, fm or satellite radio and I mute the Audio to stop listening to anything

Not sure if this is what you mean, but often I'll travel with my family and we don't turn on any music. But I want to be able to hear the audio alerts from my phone or Android GPS program (Waze). I turn on bluetooth, pause the music, and then I can still hear the audio alerts from Waze. I haven't figured out any better way to do it that doesn't require just a little input on my end.

[Plasar]

Welcome and GREAT color!

[GMP]

beautiful car. enjoy yourself

[Xelor]

Congratulations

[boss2k]

Originally Posted by Tyrolblue67

Beautiful car!
Welcome to the club.
How does it compare to the Grand Sport?
Enjoy!
Tyrolblue67

Thanks, car feels different and lot refined from the vette. The vette felt more raw and i am a bit disappointed with the exhaust note, expected to be louder and deeper. The power delivery is insane and revs faster than the vette altough i restricted to 4K now due to break in

Overall feels and looks great. The recardo seats are awesome

[boss2k]

Originally Posted by arpad_m

2. You can set all 3 positions with any key, and then recall them manually. However, the auto memory recall feature (that adjusts the seat without you doing anything when you hit the start button) is understandably bound to a key fob, the car has no way of knowing who's driving if they use the same fob.

I have the comfort options set up so the driver seat automatically moves to the exit position on opening the door, then it automatically moves to the #1 or #2 saved position depending on the fob used when driving it the next time. I use fob #1 and my wife has fob #2. When both fobs are in the car, it defaults to the last one used. As a result, I almost never have to adjust the seat or the side mirrors, it's always perfect for the driver.

Memory seat # 2 does not work and reading user guide says this, page 39

3. Press and release SET; a beep will sound.
4. Immediately upon releasing SET, press
and hold memory button 1 or 2 matching
the current Driver’s remote key number
until two beeps sound. If too much time
passes between releasing SET and
pressing 1 or 2, the two beeps will not
sound indicating memory position were
not saved. Repeat Steps 3 and 4 to try
again.

[arpad_m]

Originally Posted by boss2k

Memory seat # 2 does not work and reading user guide says this, page 39

3. Press and release SET; a beep will sound.
4. Immediately upon releasing SET, press
and hold memory button 1 or 2 matching
the current Driver’s remote key number
until two beeps sound. If too much time
passes between releasing SET and
pressing 1 or 2, the two beeps will not
sound indicating memory position were
not saved. Repeat Steps 3 and 4 to try
again.

Not sure how this is different from what I said. When you save a position, the car will remember which fob was in use so that it can auto recall the position the next time the same fob is used to start the car (if this is enabled in the settings).

One can still recall either position #1 or #2 manually regardless of the fob. Another thing you might have missed, unlike with earlier GM vehicles, in the Camaro one has to hold the memory button down until the seat stops moving when performing a manual recall (how lame, but that's their definition of "safety" for you/us).

When you say memory seat #2 "does not work", what do you do and what is not happening that you expect?

[boss2k]

Originally Posted by arpad_m

When you say memory seat #2 "does not work", what do you do and what is not happening that you expect?

When i try to set seat #2 i hit set button and it clicks once but when i click button 2 no clicks and does not save the seat position. Thats the issue

[arpad_m]

Originally Posted by boss2k

When i try to set seat #2 i hit set button and it clicks once but when i click button 2 no clicks and does not save the seat position. Thats the issue

Aha, I see. So you're saying you tried the same with position #1 and it worked, but the exact same sequence, short press of the Set button followed by holding #2 until you hear two beeps doesn't, because you never hear the two beeps and the position isn't saved to slot #2?

If this is what happens, then that's indeed a failure, maybe button #2 is dead, the module could be faulty, a wire or terminal connection could be open... if this is a CPO unit, have the dealer fix it under warranty

[DangerZL1]

Originally Posted by boss2k

The vette felt more raw and i am a bit disappointed with the exhaust note, expected to be louder and deeper.

Pull the exhaust valve fuse in the engine fuse box. I believe it’s no 51. It won’t make the exhaust louder but you’ll hear it more under lighter acceleration since you’re not waiting for the ECM to open the valves.

[boss2k]

Originally Posted by DangerZL1

Pull the exhaust valve fuse in the engine fuse box. I believe it’s no 51. It won’t make the exhaust louder but you’ll hear it more under lighter acceleration since you’re not waiting for the ECM to open the valves.

Yes i will be installing Mild2wild switch which i had in my corvette too, great mod