You are browsing camaro6 
04-06-2023, 03:24 PM
|
#1 |
 
Drives: 2022 ZL1 M6 Join Date: Mar 2022
Location: Long Beach, CA
Posts: 187
|
Dash Cam Front Fuse Box
Just wanted to contribute and show where I tapped in to wire my dash cam.
Connection was soldered, heat wrap then wrapped again with electrical tape. Have a nice day everyone!
__________________
2022 Black ZL1 M6
RF intake, Soler TB & TC, ADM v2 reservoir, AWE Touring non-resonated catback exhaust. 535 whp, 537 tq. SAE Smoothing: 5. DynoJet. No tune. 91 octane. |
|
|
|
04-07-2023, 02:39 PM
|
#2 |
 
Drives: '22 2SS Camaro Convertible 6MT NPP Join Date: Feb 2022
Location: MO
Posts: 37
|
Did you run the cable through the firewall? Was there a hole somewhere or did you make one?
__________________
2022 2SS 6MT NPP Summit White Convertible
* Skip Shift Eliminator 03/04/2022 | Spotted in-transit 2SS Vert 6MT NPP on Chevy website 03/30/2022 | Took delivery from dealer  |
|
|
|
|
08-03-2023, 03:08 PM
|
#3 |
 
Drives: 2021 Camaro ZL1 1LE Join Date: Nov 2021
Location: Germany
Posts: 2
|
Blackvue Dashcam and Battery B-130X
Hey,
your wiring looks good, I used the same fuses for my dashcam before I installed the battery pack  I have a question for my Blackvue battery pack wiring though and hope other people see this and can help me. The battery pack manual says to use a fuse that is 10A or less, which severely limits the capabilities of the front fuse box. I had been using fuse F61, but it blew, so I know it goes to the mass air flow sensor. As an alternative I want to use F46, but I want to avoid that this body control module accesses important systems. Does anyone know what this body control module does or have another idea which fuse I should use? |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
