You are browsing camaro6 
03-18-2023, 03:27 PM
|
#1 |
      
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,839
|
Need Part Number please...
Anyone have a part number for the Transmission filter on an A10.
Trying to find a kit with gasket but no one has them, Tried Autozone, Oreily's, Napa, Advanced Auto Parts. Or is there some online retailer that I should be looking at. I'm on Rock Auto's site now but no part number to search with.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
|
|
|
|
03-18-2023, 03:43 PM
|
#2 |
|
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,839
|
Found the oil
Dexron ACDELCO 104107 GM Original Equipment; 1 Quart; ULV-ATF; GM Original Equipment; Dexron ULV, 1 Quart Info 10 speed Need gasket and filter
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
|
|
|
|
|
03-18-2023, 04:27 PM
|
#3 |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: New Ipswich NH
Posts: 6,323
|
Here you go:
https://www.gmpartsdirect.com/v-2020...c-transmission Looks like it’s back ordered but at least you have the part number now.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
03-19-2023, 09:32 AM
|
#4 | |
|
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,839
|
Quote:
Was able to get it from Chevy Parts Direct (Same difference as GM Parts Direct) The trans oil I can get from Rock Auto. Just to clarify will I need a gasket for it. The kit says it includes seal. If I need to pick up gasket for it, I'll need to order it before next weekend.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
Last edited by FlukeSS; 03-19-2023 at 09:50 AM. |
|
|
|
|
|
03-19-2023, 10:01 AM
|
#5 |
|
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,839
|
Was able to get under the car yesterday.
Learned I have an exhaust vapor leak. Shit Speed Engineering Clamps. Anyone recommend exhaust clamps?
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
|
|
|
|
|
03-19-2023, 12:05 PM
|
#6 |
|
Shadow Gray '19 ZLE M6
|
Just a tip -- the easiest way to navigate RockAuto is with the expandable tree in the "Part Catalog"
Chevrolet > 2020 > Camaro > 6.2L V8 > Transmission-Automatic Then you can filter down to "Filter" and "Fluid Pan Gasket" to see the available options. Both categories have GM / ACDelco options with the part number. When I'm looking for a part number, I typically start with a GM parts site like GM Parts Direct, but if I'm not finding what I'm looking for easily, I'll hop over to Rock Auto.
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
|
|
|
|
03-19-2023, 06:51 PM
|
#7 | |
|
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Here
Posts: 1,839
|
Quote:
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | Roto-Fab CAI | LT2 Ported | 95mm ZR1 TB | LSA crankshaft conversion w/modified crank gear | LS1 thrust bearing | Gen V Hinson Plug Wire Set | BTR 220 Stage I Cam | ARP Rod Bolts | Delphi Lifter set | NGK LTR6IX-11 spark plug set | DOD Delete | VVT Limiter | ECM, TCM & E85 | Retuned by: Justin L. | Dyno: 510 rwhp 472 rwtq | Best 1/4 Time: 11.639
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
