[CamaroDreams76]

detail spray and a microfiber

something like back to black or vinyl cleaner and a microffiber

all purpose cleaner and a microfiber

rubbing alcohol cut 50/50 with water and a microfiber


play with the pressure of the microfiber for results.

[Jus Cruisin]

Originally Posted by rst08tierney

This is the worst advice. Satin will turn to gloss with a magic eraser. Do not do this, you'll need to buff the entire hood and still pray the spots wont show.

Used it as needed on this. Never took the matte out.

[HemiDave]

Had my vinyl hood covered with Xpel, protects from spotting and rock tears.

.

[nametaken]

Originally Posted by hotlap

I had spots on my matte finish stripes. Someone on C6 recommended this and it did the trick. Also, parking in the sun helped.

I hadn’t applied this in over 6 weeks due to winter weather. When I detailed and waxed last Saturday there were spots on the stripes again. I did multiple applications letting is sit in the garage for hours between. They disappeared

https://www.chemicalguys.com/meticul...PI_995_16.html

I use the same and am very diligent about keeping it clean, it only takes a few minutes to wipe it down, I know I will get spots at some point though

[Wildcard]

Originally Posted by ckt227

I went through the same thing on my 21 2SS 1LE. be polite but persistent. Apparently 3M installs the hood wraps on new 1LE'S. Took a bit, but GM and the dealer had to replace it under warranty. Dealer had to take photos, share with GM, order the new wrap, and set up an appointment at a local 3M authorized shop. Dealers I guess are not allowed to change out wraps, or least not in SW Florida. 4 local dealers said no we can't, even under warranty.

Odd thing was I had to get a piece of the old wrap and give it to the dealer to return to GM.

Alcohol, chemical guys miraculous Matte did nothing...Mine is clearly a factory defect.

ckt227 Thank you so much for the encouragement and for saying that!
Thanks!!!