[Smokin19]

You do realize if you want a cam the heads must come off and require some parts replaced. When doing engine work and mods you must look ahead to what you might do in the future or you will be doing double the work and cost. Do more research.

[2023_ZL1-AUTO]

Originally Posted by Smokin19

You do realize if you want a cam the heads must come off and require some parts replaced. When doing engine work and mods you must look ahead to what you might do in the future or you will be doing double the work and cost. Do more research.

Got it, Thanks... yeah I think the CAM might end up being a fall/winter project done by a shop that specializes in LT4 / ZL1s. Right scratching my head... I just did the headers, so when I had the manifolds off, that would have been the time to pull the heads and do the CAM... I get it!

[JBones81]

Originally Posted by hawk02

JBones81 has given some good advice to start the "head turner" process for the cars and coffee crowd. I'll go further and say there’s a lot that can be done under the hood and inside the car. And don't forget wheels. It doesn't require expensive performance mods to make folks take notice of your car. Just a little imagination.

Looks good, but one question - Why the stock floor mats?! Get some zl1 mats in there to really finish out that cabin

[2023_ZL1-AUTO]

Originally Posted by JBones81

Looks good, but one question - Why the stock floor mats?! Get some zl1 mats in there to really finish out that cabin

WOW! I got nothing to say on that one! I will order some !

[hawk02]

Originally Posted by JBones81

Looks good, but one question - Why the stock floor mats?! Get some zl1 mats in there to really finish out that cabin

I have the fancy ZL1 floor mats. I put those in after I arrive at the event. The stock floor mats are my driving mats.

[JBones81]

Originally Posted by hawk02

I have the fancy ZL1 floor mats. I put those in after I arrive at the event. The stock floor mats are my driving mats.

Oh ok, gotcha