Texas speed plug wires or Granatelli

KILLA BEE · 01-18-2023, 03:26 PM

Msd (as usual) plug wires were the cause of my misfire in my prior post even with boots on them. Never again. Well anyway my tuner suggested Texas speed they are shorter at the spark plug and angle straight up avoiding the headers completely. I did some research and seems granetelli is the best but twice the price which I’m not worried about. Any experience with either one?

kropscamaro16 · 01-18-2023, 03:44 PM

i have msd but i did it again id go with granatelli

2023_ZL1-AUTO · 01-18-2023, 04:27 PM

I just bought custom length 0 ohm Granatelli's for my Katech valve covers and coil relocation kit ! Waiting for them to arrive !!!

20Bluezl1 · 01-18-2023, 04:52 PM

I had MSD and one plug git burned so I bought the Granatelli with there heat shield and no problem they look nice also. Get the high temp wires which are a little more but your safer.

KILLA BEE · 01-18-2023, 06:19 PM

Quote:

Originally Posted by 20Bluezl1

I had MSD and one plug git burned so I bought the Granatelli with there heat shield and no problem they look nice also. Get the high temp wires which are a little more but your safer.

Gotcha

JSH · 01-18-2023, 06:36 PM

I put ACCEL w/ceramic boots on mine but seriously doubt I realized any benefit over OEM. Save your money unless you're trying to dress up your engine bay.

*Joshinator99* · 01-18-2023, 06:59 PM

Granatelli ones have been absolutely perfect. No issues at all past 2 years I’ve been running them.

Smokin19 · 01-19-2023, 07:48 AM

I run the Granatelli wires with no problems.

45LongColt · 01-19-2023, 08:02 AM

I have switched 3 times now and absolutely love the KATech High Performance Wires. They connect solid, shrink coated at both ends and much thicker then 8.5mm. Had to switch boots over to ringless DEI Titaniums to fit.

laynlo15 · 01-19-2023, 08:41 AM

I run the Speed Engineering, especially if your running headers, they make their own wires and you can buy them in 10" which is standard but the 12" work best with the headers. I've run them on my 16SS, my C7 and 2022 Lt1 even though I don't have headers on it.

KingLT1 · 01-19-2023, 09:16 AM

Granatelli are top notch, but for a cheaper option the Speed Engineering are solid as mentioned above...

laynlo15 · 01-19-2023, 10:11 AM

Honestly, I think King agrees with me on this, there is nothing wrong with the stock wires unless you are just wanting a better-looking setup. I haven't installed them yet on my Lt1 but have them ready to go as soon as I get motivated to install them, been cold here in Missouri so no big hurry since the tracks don't open till March. I made 707/662 on the stock GM wires.

dmcmahan60 · 01-19-2023, 11:14 AM

Quote:

Originally Posted by KingLT1

Granatelli are top notch, but for a cheaper option the Speed Engineering are solid as mentioned above...

This and I agree

KILLA BEE · 01-19-2023, 11:27 AM

Quote:

Originally Posted by dmcmahan60

This and I agree

Hmmmm I do have speed engineering headers let me read up on this

01-18-2023, 03:26 PM	#1
KILLA BEE Black lightning Drives: 2021 ZL1 1LE A10 Join Date: Mar 2013 Location: Nottingham Md Posts: 1,997 View My Garage	Texas speed plug wires or Granatelli Msd (as usual) plug wires were the cause of my misfire in my prior post even with boots on them. Never again. Well anyway my tuner suggested Texas speed they are shorter at the spark plug and angle straight up avoiding the headers completely. I did some research and seems granetelli is the best but twice the price which I’m not worried about. Any experience with either one? __________________ [ 2021 Camaro ZLE 10 speed

01-18-2023, 03:44 PM	#2
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 10,130	i have msd but i did it again id go with granatelli __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

01-18-2023, 06:36 PM	#6
JSH Drives: '20 ZLE Join Date: Jun 2020 Location: Mile High Posts: 4,148	I put ACCEL w/ceramic boots on mine but seriously doubt I realized any benefit over OEM. Save your money unless you're trying to dress up your engine bay. __________________ 2020 ZL1LE A10. LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: Last edited by JSH; 01-19-2023 at 12:30 PM.

01-18-2023, 06:59 PM	#7
Joshinator99 Moderator Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: Petersham MA Posts: 6,199	Granatelli ones have been absolutely perfect. No issues at all past 2 years I’ve been running them. __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)

01-19-2023, 07:48 AM	#8
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,700	I run the Granatelli wires with no problems. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/Gesi cats, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

01-18-2023, 04:27 PM	#3
2023_ZL1-AUTO Drives: 2023 ZL1 - All Bolt On's Join Date: Dec 2022 Location: Columbus, Ohio Posts: 1,188	I just bought custom length 0 ohm Granatelli's for my Katech valve covers and coil relocation kit ! Waiting for them to arrive !!!

01-18-2023, 04:52 PM	#4
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,238	I had MSD and one plug git burned so I bought the Granatelli with there heat shield and no problem they look nice also. Get the high temp wires which are a little more but your safer.

01-19-2023, 08:02 AM	#9
45LongColt Drives: 2018 Zl1 Camaro Join Date: Feb 2018 Location: Gainesville, VA Posts: 149	I have switched 3 times now and absolutely love the KATech High Performance Wires. They connect solid, shrink coated at both ends and much thicker then 8.5mm. Had to switch boots over to ringless DEI Titaniums to fit. __________________ Big Gulp\|NW103\|SW Headers\|UHO CATS\|XPipe\|Borla Atak\|MM CC\|Kong Ported\|NSX\|ATI Damper\|DSX 9.45 Lower\|ZPE 2.5 Upper\|DM Tensioner\|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller\|Katech Valley\|KaTech Valve Covers\|MSD Coils\|DSX E Sensor & Aux Pump\|ICT Water Pump\|Katech Oil Pump\|Cordes & Mishimoto Expansion Tanks\|P3 Gauge\|LC-2 Wideband Sensor\|KaTech Wires\|DynoJet Tuned

01-19-2023, 08:41 AM	#10
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	I run the Speed Engineering, especially if your running headers, they make their own wires and you can buy them in 10" which is standard but the 12" work best with the headers. I've run them on my 16SS, my C7 and 2022 Lt1 even though I don't have headers on it.

01-19-2023, 09:16 AM	#11
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 7,561	Granatelli are top notch, but for a cheaper option the Speed Engineering are solid as mentioned above... __________________ 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel

01-19-2023, 10:11 AM	#12
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Honestly, I think King agrees with me on this, there is nothing wrong with the stock wires unless you are just wanting a better-looking setup. I haven't installed them yet on my Lt1 but have them ready to go as soon as I get motivated to install them, been cold here in Missouri so no big hurry since the tracks don't open till March. I made 707/662 on the stock GM wires.

User Name		Remember Me?
Password