BEST UNDERHOOD PHOTOS - Page 5

*Joshinator99* · 11-03-2022, 07:37 AM

Quote:

Originally Posted by L78toLT1

Looking good, Josh. The white powder coat really sets things off. Generally speaking, all the modded Gen6's look alike under the hood. Identical looking, matte black Maggies and Whipples with the occasional procharger. The white really sets yours apart.

Thank you sir. Wasn’t sure if many people would catch that it was white to match the white interior, but wanted to do something different.

JSH · 11-03-2022, 03:52 PM

Quote:

Originally Posted by ZL1Atlanta

Thanks. Yeah, they are right behind the blower.

Too bad this baby doesn't fit a Camaro

SOCAL.M6.ZLE · 11-03-2022, 04:00 PM

So SEXY!!!

SOCAL.M6.ZLE · 11-12-2022, 05:54 PM

Well, I am ready to join the party... Thanks again everyone for the inspiration.

Here is the before and after...

Smokin19 · 11-13-2022, 07:17 AM

Congrats on a fine looking underhood. Curious as to why you didn't go with the big gulp. Of course we are never done right.

SOCAL.M6.ZLE · 11-13-2022, 10:58 AM

Quote:

Originally Posted by Smokin19

Congrats on a fine looking underhood. Curious as to why you didn't go with the big gulp. Of course we are never done right.

Thank you sir!... Great question... I believe I have already maxed the fuel system, so I concluded that adding anything additional would have a net ZERO gain. With that said, if i am wrong, or when i upgrade the fuel system more, it will be on the round of mods for sure!

SOCAL.M6.ZLE · 12-03-2022, 12:56 AM

TTT, lets se some more sexy engine bays!!!

WiggyB · 12-12-2022, 08:58 PM

The finished product..............

SOCAL.M6.ZLE · 12-13-2022, 11:46 AM

Damn, that looks like a pretty serious build

CamOnlyJabroni · 12-13-2022, 07:48 PM

MPI Lid on the ZL1 and DSX 2650 lid with ZL1 lid design on the ZO6

JTS · 12-13-2022, 11:02 PM

Quote:

Originally Posted by CamOnlyJabroni

MPI Lid on the ZL1 and DSX 2650 lid with ZL1 lid design on the ZO6

Is that breather on the ZL1 , this one

CamOnlyJabroni · 12-14-2022, 07:52 AM

Quote:

Originally Posted by JTS

Is that breather on the ZL1 , this one

https://jannettyracing.com/products/...2015-camaro-ss

JTS · 12-14-2022, 05:45 PM

Cool thanks , there the same Metco .

45LongColt · 12-29-2022, 01:01 AM

Guess Ill jump in on this…

11-03-2022, 04:00 PM	#59
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	So SEXY!!! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

11-12-2022, 05:54 PM	#60
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	Well, I am ready to join the party... Thanks again everyone for the inspiration. Here is the before and after... Attached Images __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

11-13-2022, 07:17 AM	#61
Smokin19 Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014 Location: S.W. ohio Posts: 1,700	Congrats on a fine looking underhood. Curious as to why you didn't go with the big gulp. Of course we are never done right. __________________ BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/Gesi cats, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.

12-03-2022, 12:56 AM	#63
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	TTT, lets se some more sexy engine bays!!! __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

12-12-2022, 08:58 PM	#64
WiggyB Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021 Location: NC Posts: 377	The finished product.............. Attached Images __________________ d1sc factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection

12-13-2022, 11:46 AM	#65
SOCAL.M6.ZLE Having FUN in the SUN... Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022 Location: San Diego CA Posts: 2,056	Damn, that looks like a pretty serious build __________________ 2022 M6 ZLE: GMS Stage.III KONG X.PORT Package + DMS Lid + 10.RIB Package + GMS Rear Bumper Belly Pan + GMS Hood Bracket + GMS Stage.III HX System + MONSTER Triple S Clutch + XDI.50% Injectors + CLICK FOR FULL BUILD LIST or www.GRIFFIN-MOTORSPORTS.com

12-13-2022, 07:48 PM	#66
CamOnlyJabroni Drives: 19’ ZL1 A10 / 16’ C7Z M7 Join Date: Apr 2021 Location: Ft.Wayne, IN Posts: 326	MPI Lid on the ZL1 and DSX 2650 lid with ZL1 lid design on the ZO6 Attached Images

12-14-2022, 05:45 PM	#69
JTS Drives: 2023 ZL1 A10 Join Date: Nov 2021 Location: Az Posts: 624	Cool thanks , there the same Metco . __________________ 2023 ZL1 A10 Shadow Gray Metallic

12-29-2022, 01:01 AM	#70
45LongColt Drives: 2018 Zl1 Camaro Join Date: Feb 2018 Location: Gainesville, VA Posts: 149	Guess Ill jump in on this… Attached Images __________________ Big Gulp\|NW103\|SW Headers\|UHO CATS\|XPipe\|Borla Atak\|MM CC\|Kong Ported\|NSX\|ATI Damper\|DSX 9.45 Lower\|ZPE 2.5 Upper\|DM Tensioner\|FW Green Belt/BTR Gen V LT4 Cam w/32% lobe/BTR VVT Lockout/Pratt & Miller Chain/BTR Pushrods,Valve Springs, Retainers, Hydraulic Lifters & Guide Plate, Trunnion Roller\|Katech Valley\|KaTech Valve Covers\|MSD Coils\|DSX E Sensor & Aux Pump\|ICT Water Pump\|Katech Oil Pump\|Cordes & Mishimoto Expansion Tanks\|P3 Gauge\|LC-2 Wideband Sensor\|KaTech Wires\|DynoJet Tuned

User Name		Remember Me?
Password