What did you do to your 6th Gen Camaro today?! - Page 895

ZPirate · 11-04-2022, 09:25 AM

Quote:

Originally Posted by arpad_m

I'm in the other camp, don't mind the brake dust at all (my 1LE wheels are brake dust gray plus wheel cleaning is therapeutic, especially with these easy to reach around spokes), and the Ferodos are definitely better pads.

I'm sort of in your camp. I don't like the brake dust, but I'm not ready to replace brand new pads in order to get rid of it. I'm hoping the ceramic coating I just applied to my wheels will make them a lot easier to clean. I'm planning on washing the car this weekend for the first time since then so we will see.

The Maverick · 11-04-2022, 09:47 AM

Quote:

Originally Posted by ZPirate

I'm sort of in your camp. I don't like the brake dust, but I'm not ready to replace brand new pads in order to get rid of it.

At 5K miles with the factory polished aluminum wheels, I am leaning toward a Powerstop replacement pad. I had read about the dust in the forums and figured I could live with it given how often as I wash the car. But those front Brembos make for the wheel equivalent of "my black car looks ready to wash again five minutes after I finished washing it."

ZPirate · 11-04-2022, 10:23 AM

Quote:

Originally Posted by The Maverick

At 5K miles with the factory polished aluminum wheels, I am leaning toward a Powerstop replacement pad. I had read about the dust in the forums and figured I could live with it given how often as I wash the car. But those front Brembos make for the wheel equivalent of "my black car looks ready to wash again five minutes after I finished washing it."

I understand. And with polished wheels keeping them clean is much harder. At least my 1LE wheels are dark colored (graphite) so they don't show the brake dust quite as bad.

CrushSS · 11-04-2022, 09:37 PM

Quote:

Originally Posted by The Maverick

At 5K miles with the factory polished aluminum wheels, I am leaning toward a Powerstop replacement pad. I had read about the dust in the forums and figured I could live with it given how often as I wash the car. But those front Brembos make for the wheel equivalent of "my black car looks ready to wash again five minutes after I finished washing it."

It’s not only the wheels that get dirty. I just did mine at 10k strictly due to dust. Didn’t just pull the pins and drop in new pads, took calipers off to remove discs to clean them and backing plates. Dust was caked everywhere…coil springs, control arms, struts, sway bar, frame rails…and it’s corrosive. Attaches itself while hot and reacts with the steel and alloy. Couldn’t be happier they’re gone. No difference in performance.

*Joshinator99* · 11-04-2022, 09:46 PM

Quote:

Originally Posted by CrushSS

It’s not only the wheels that get dirty. I just did mine at 10k strictly due to dust. Didn’t just pull the pins and drop in new pads, took calipers off to remove discs to clean them and backing plates. Dust was caked everywhere…coil springs, control arms, struts, sway bar, frame rails…and it’s corrosive. Attaches itself while hot and reacts with the steel and alloy. Couldn’t be happier they’re gone. No difference in performance.

I feel the same way and switched to the Z26 Powerstop pads after about 500 miles on the odometer from new. It was staggering how much dust the OEM pads create! So I’ve been on the Z26 pads for 4 years now. I’m still able to haul down from 149 MPH at the end of a quarter mile drag strip run too with no drama. So unless you’re tracking the car (and would have bought a 1LE in that case anyway lol), I’d switch the pads ASAP.

2SS Capt · 11-04-2022, 11:25 PM

Quote:

Originally Posted by CrushSS

It’s not only the wheels that get dirty. I just did mine at 10k strictly due to dust. Didn’t just pull the pins and drop in new pads, took calipers off to remove discs to clean them and backing plates. Dust was caked everywhere…coil springs, control arms, struts, sway bar, frame rails…and it’s corrosive. Attaches itself while hot and reacts with the steel and alloy. Couldn’t be happier they’re gone.

THIS!

Quote:

Originally Posted by Joshinator99

I feel the same way and switched to the Z26 Powerstop pads after about 500 miles on the odometer from new. It was staggering how much dust the OEM pads create! So I’ve been on the Z26 pads for 4 years now. I’m still able to haul down from 149 MPH at the end of a quarter mile drag strip run too with no drama. So unless you’re tracking the car (and would have bought a 1LE in that case anyway lol), I’d switch the pads ASAP.

And THIS!

MakCamaro · 11-05-2022, 04:02 AM

Almost convinced! So what is the part number for the Z26 Powerstop pads for the ZL1? Is it the Z26-1835 for the front ones?

*Joshinator99* · 11-05-2022, 07:18 AM

Quote:

Originally Posted by MakCamaro

Almost convinced! So what is the part number for the Z26 Powerstop pads for the ZL1? Is it the Z26-1835 for the front ones?

I did a search on the Powerstop website and that’s what came up for your car.

CrushSS · 11-05-2022, 07:25 AM

Quote:

Originally Posted by MakCamaro

Almost convinced! So what is the part number for the Z26 Powerstop pads for the ZL1? Is it the Z26-1835 for the front ones?

Name: 6972166E-2B0D-4E26-BB7F-0BFB5A4CBEC4.jpg
Views: 712
Size: 73.0 KB

Name: 807D286A-8FE7-47F5-94DC-E397EA03CD72.jpg
Views: 654
Size: 72.0 KB

MakCamaro · 11-05-2022, 07:48 AM

Thank you guys, much appreciated!

CrushSS · 11-05-2022, 07:54 AM

Quote:

Originally Posted by MakCamaro

Thank you guys, much appreciated!

You’re welcome. By the way your Z is really badass

Jus Cruisin · 11-05-2022, 08:14 AM

Quote:

Originally Posted by CrushSS

Attachment 1113086

Attachment 1113087

I'm guessing the 2023 uses the same pads. Powerstop isn't showing anything for the 2023 Camaros

CrushSS · 11-05-2022, 08:28 AM

It’s probably worth a call to them or you could verify that the caliper part numbers have not changed from ‘22 to ‘23 and this would confirm they’ll fit. Likely they just haven’t gotten around to adding their ‘23 listings.

Jus Cruisin · 11-05-2022, 09:55 AM

What did I do today? Added Stabil, filled it up wiped it down, plugged in Battery Tender and covered it. Calling State Farm Monday and taking road coverage off. Done till the salt gets washed off the roads in the spring.

11-05-2022, 04:02 AM	#12523
MakCamaro Makis Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019 Location: London - UK Posts: 819	Almost convinced! So what is the part number for the Z26 Powerstop pads for the ZL1? Is it the Z26-1835 for the front ones? __________________ Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it Mosaic black 2018 Camaro 2SS A8 (sold)

11-05-2022, 07:48 AM	#12526
MakCamaro Makis Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019 Location: London - UK Posts: 819	Thank you guys, much appreciated! __________________ Red Hot 2020 Camaro ZL1 A10 <-- Enjoying the hell out of it Mosaic black 2018 Camaro 2SS A8 (sold)

11-05-2022, 09:55 AM	#12530
Jus Cruisin Old Gearhead Drives: 2023 GMC Sierra Denali Ultimate Join Date: Nov 2018 Location: MI Posts: 547	What did I do today? Added Stabil, filled it up wiped it down, plugged in Battery Tender and covered it. Calling State Farm Monday and taking road coverage off. Done till the salt gets washed off the roads in the spring. Attached Images __________________ 2023 Camaro ZL1 convertible - black - SOLD 2025 GMC Sierra Denali Ultimate - black - 3.0l diesel 1937 Ford Slantback

11-05-2022, 08:28 AM	#12529
CrushSS Drives: ‘20 2SS Crush Orange Join Date: Sep 2022 Location: NE Ohio Posts: 34	It’s probably worth a call to them or you could verify that the caliper part numbers have not changed from ‘22 to ‘23 and this would confirm they’ll fit. Likely they just haven’t gotten around to adding their ‘23 listings.

User Name		Remember Me?
Password