[JSH]

Originally Posted by Squatch

Doesn't putting a fat drag radial on the car (so it wont spin at all) just make the torque management kick in even harder? (pull timing etc.), so it doesn't speed you up that much?

I want the tire to spin a little but if it spins too much the ECU will pull timing. This car has done that with both the 3R and 4S tire. My thought is to put a big drag slick on it, do a hot burnout and see if the car will bite in either manual or auto, both with and without launch mode.

The NHRA guys have figured all this out.

[Blue70SS]

Originally Posted by JSH

I want the tire to spin a little but if it spins too much the ECU will pull timing. This car has done that with both the 3R and 4S tire. My thought is to put a big drag slick on it, do a hot burnout and see if the car will bite in either manual or auto, both with and without launch mode.

The NHRA guys have figured all this out.

Did you ever get this figured out?

[JSH]

Originally Posted by Blue70SS

Did you ever get this figured out?

Yea, I put a 325 R888R on it and will now have to go to a 345