You are browsing camaro6 
08-24-2022, 11:58 AM
|
#1 |
 
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
DSX low side installed. First impressions.
I had the JMS pushing my low side fuel pump for the 125 Flex Fuel mod from Ted. After the Maggie/cam mod, it wasn't enough.
Installation went smooth and here is what I have now. At 6500rpm on e50, I am getting commanded fuel pressure, low and high, with 28 degrees timing and 14.69 psi of boost. IPWs are 5.11ms. I am curious if she will run e60? And, if the 10% will outweigh the risk?
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
08-24-2022, 01:09 PM
|
#2 |
Drives: 2024 ZL1 M6 Join Date: Sep 2018
Location: Pace FL
Posts: 449
|
With it holding commmanded and the inj pulse width good, I bet it will take E60 no issue. E50-E60 is the sweet spot and works well on these fuel limited systems.
__________________
2024 Riverside Blue ZL1 M6
Magnuson 2650R, NW 103, Roto Fab Big Gulp Kooks 2 inch LT's, Stainless Works Legend NPP THP Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, BMR springs, BMR Cradle lockout, AAD Billet arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold |
|
|
|
|
08-24-2022, 01:39 PM
|
#3 |
|
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
We will find out.
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
|
08-24-2022, 02:00 PM
|
#4 |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,203
|
28 degrees of timing on E50 sounds like a LOT…? I would have expected 22-23…
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
08-24-2022, 02:00 PM
|
#5 |
 
Drives: Chevrolet Camaro Join Date: Apr 2022
Location: Maryland
Posts: 215
|
28 degrees is a ton more than I'm running, although you're 1.5 points lower compression and blending ethanol. Am I just baby soft at 15 degrees on 93 at 10 psi?
__________________
Procharger P1X, CSP Big Boy Cam, CSP Headers, LT5 Throttle Body, MSD Intake, LT4 HPFP, LT4 Injectors, JMS BAP, 93 + Boostane - 750+WHP
|
|
|
|
08-24-2022, 02:14 PM
|
#6 | |
     
Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Quote:
Your already at max timing Martin  I know you want to keep running E60, but your timing is already very high for E50. Plus ted never removed the adders for PE/COT so its got even more timing adding into it. It will take it, but I highly doubt your making anymore power.I told you the JMS wasn't enough
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
08-24-2022, 02:17 PM
|
#7 | |
|
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Quote:
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
|
|
08-24-2022, 02:22 PM
|
#8 | |
|
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Quote:
 Now, what about a little rebate? Do you think I should limit the timing? I am not looking for .001's.
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
|
|
08-24-2022, 02:36 PM
|
#9 |
|
Former GM Technician
Drives: 2018 ZL1 A10, 06 Silverado Duramax Join Date: Sep 2009
Location: Switzerland
Posts: 396
|
I was seeing the same on my friends car that Ted just tuned.
I asked him if the 28° is not too much for his car running top speed on the German Autobahn. Ted answered that E requires alot of timing.
__________________
2018 Camaro ZL1 A10
Rotofab Big Gulp, Nick Williams 103, Magnuson 2650, 9.17" (14%) lower, 90mm upper, Vengeance Racing Heads (LME) Cam Package (Cammotion Stage 1), Johnson Lifters, DSX dual intank pump, Lingenfelter high flow check valve, Motion Raceworks Flex Fuel adapter, LPE Big Bore Hpfp, XDI 30% Injectors, BBK shorty headers, Custom 2.75" down pipes, Gesi Gen2 high flow cats, MM catch can. 2006 Silverado Duramax Diesel MPI Compound Turbo 40% over Injectors Efi Live DSP5 Tuning Follow me on Instagram: SwissZL1 |
|
|
|
|
08-24-2022, 02:45 PM
|
#10 |
|
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Just sent Ted an email. His first question was low side pressure: 72psi. I'm awaiting a reply.
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
|
08-24-2022, 03:03 PM
|
#11 |
|
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 5,156
|
|
|
|
|
|
08-24-2022, 03:08 PM
|
#12 |
|
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Stay tuned
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
|
08-24-2022, 03:11 PM
|
#13 |
|
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,805
|
Ted like to run more timing than most on e85, for what it's worth. To the tune of like 4 to 5 degrees, typically. To me, on e85: when it stops making more power, stop adding timing, then drop a degree out of it and call it a day.
Also, you won't SEE knock retard on E, even if knock is present. You can run timing high enough to get yourself into trouble. That said, Ted has a LOT of these cars out there, so if he's comfy at 28 degrees, I wouldn't sweat it. Does the car ever actually SEE 28 degrees in a log? It may just be 28 in the main high octane table, but the adders pull it down.
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp // CSP LT's & Ultra Cats // BMR MM // BC Forged KL13
Mods being installed- oil pump, cam, ported heads, dual in-tank, Goliath and XDI, corn, etc., etc. |
|
|
|
|
08-24-2022, 03:37 PM
|
#14 | |
|
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Quote:
Ted's response to my query about the timing was, "what about it?" My response was, "All the "fellas" say it is excessive." His response, "All the "fellas" are not professionals." Gotta love him. I have not heard one negative comment about him. I was more concerned that I may have done something to upset his tune. I will settle at e50 (yes, Mike  ) and call it a day.
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
