Anyone have experience with BMR motormounts with a cam? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Teeth · 08-16-2022, 09:12 PM

How bad would it shake someone up? Could I have a bottle of soda in the car or would that get shaken up too bad?

1JEWLDSSRS · 08-17-2022, 08:24 AM

lol, from what I've read on here, it makes the connection pretty solid and you will feel the vibrations a lot more.

hawkyV8 · 08-17-2022, 08:38 AM

I have the BMR mounts and a Stage III cam from BTR. It's not bad at all. There really wasn't much increase in NVH since I installed them. The car has a nice and subtle shake at the stoplight that I just can't get enough of.

CamaroCracka · 08-17-2022, 08:43 AM

I have Prothane mounts and a pretty hefty cam, plus sold cradle bushings and a trans mount insert. Someone could still easily drink a cup of coffee if I allowed such things in the car.

The worst NVH experience I've had was when I had to replace the turbo manifold. The new manifold had a piece of exhaust bar touching the steering column and I thought my valve train had an issue or the new trunnion bushings were really loud. I cut the excess bar off and all is back to normal.

Teeth · 08-17-2022, 10:35 AM

Quote:

Originally Posted by 1JEWLDSSRS

lol, from what I've read on here, it makes the connection pretty solid and you will feel the vibrations a lot more.

Quote:

Originally Posted by hawkyV8

I have the BMR mounts and a Stage III cam from BTR. It's not bad at all. There really wasn't much increase in NVH since I installed them. The car has a nice and subtle shake at the stoplight that I just can't get enough of.

Quote:

Originally Posted by CamaroCracka

I have Prothane mounts and a pretty hefty cam, plus sold cradle bushings and a trans mount insert. Someone could still easily drink a cup of coffee if I allowed such things in the car.

The worst NVH experience I've had was when I had to replace the turbo manifold. The new manifold had a piece of exhaust bar touching the steering column and I thought my valve train had an issue or the new trunnion bushings were really loud. I cut the excess bar off and all is back to normal.

The only problem I've got is the car already jostles me while at the light as it is! I don't mind it, just hoping it won't be too much with the BMR mounts.

Ashen 6.2 · 08-17-2022, 11:26 AM

I have the BMR mounts and no issues with excessive NVH or shake.

thef4ng · 08-17-2022, 04:04 PM

I have the BMR solid mounts and a GPI VVT1 cam. Doesn’t spill my coffee. Lol. Honestly you feel it more the first time and eventually get used to it. But nothing I don’t regret.

1JEWLDSSRS · 08-18-2022, 09:18 AM

Quote:

Originally Posted by Teeth

The only problem I've got is the car already jostles me while at the light as it is! I don't mind it, just hoping it won't be too much with the BMR mounts.

lol. Just nervous energy wanting to get out!! Ride it brother!! And enjoy it.. People who see it and know, respect the shake!!

08-16-2022, 09:12 PM	#1
Teeth Drives: 2010 Chevrolet Camaro SS Join Date: Sep 2019 Location: Columbia, South Carolina Posts: 225 View My Garage	Anyone have experience with BMR motormounts with a cam? How bad would it shake someone up? Could I have a bottle of soda in the car or would that get shaken up too bad? __________________ 2010 Camaro 2SS/RS: Cyber gray matte wrap, Danti Lambo style louvers, Granatelli Pro-stock look wing B&M transcooler, Mishimoto oil cooler, Mishimoto catchcan, Borla/Pypebomb axle back L99 to LS3 conversion, Vararam ram air intake, BTR Nightfury cam, Johnson lifters, LS7 injectors, Circle D 3200 stall converter, Kooks LT headers, Custom X-pipe

08-17-2022, 08:24 AM	#2
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,485	lol, from what I've read on here, it makes the connection pretty solid and you will feel the vibrations a lot more. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

08-17-2022, 08:43 AM	#4
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,780	I have Prothane mounts and a pretty hefty cam, plus sold cradle bushings and a trans mount insert. Someone could still easily drink a cup of coffee if I allowed such things in the car. The worst NVH experience I've had was when I had to replace the turbo manifold. The new manifold had a piece of exhaust bar touching the steering column and I thought my valve train had an issue or the new trunnion bushings were really loud. I cut the excess bar off and all is back to normal. __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.

08-17-2022, 11:26 AM	#6
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 2,028 View My Garage	I have the BMR mounts and no issues with excessive NVH or shake. __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

08-17-2022, 08:38 AM	#3
hawkyV8 Drives: 2010 Camaro SS 6m Join Date: May 2020 Location: Iowa Posts: 62	I have the BMR mounts and a Stage III cam from BTR. It's not bad at all. There really wasn't much increase in NVH since I installed them. The car has a nice and subtle shake at the stoplight that I just can't get enough of.

08-17-2022, 04:04 PM	#7
thef4ng Drives: 2012 Camaro SS A6 SIM Join Date: Nov 2016 Location: Banning Posts: 47	I have the BMR solid mounts and a GPI VVT1 cam. Doesn’t spill my coffee. Lol. Honestly you feel it more the first time and eventually get used to it. But nothing I don’t regret.