|
|
#1 |
![]() Drives: Chevy camaro zl1 Join Date: Sep 2020
Location: Tucson
Posts: 14
|
A10 launch question with Over 800 HP Cars
I have a question I was at the drag strip and the best 60ft I was able to achieve was a 1.7 on 17 MT r’s launching off idle. How can I decrease my 60ft and is it better to launch in manual mode for first gear? please let me know and thanks.
|
|
|
|
|
|
#2 |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,198
|
I have to launch in 2nd gear which can be done with TCM tuning on an A8 (which I have). Best 60’ is a 1.47 and it’s dead consistent. Depending on the year of your ZL1 you can either tune the TCM or if it’s newer (‘19-up I think) you’d have to pay for a different TCM to be able to tune it. There have been threads on this board about that process.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,560
|
Need a trans tune so the throttle will open all the way off the line or it's never going to 60ft any harder.
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
#4 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,882
|
I just launch right off idle, best 60ft is 1.72 on my 2022 Lt1. I think I could break into the 1.60s if I was running a stock height drag radial. Mine are just about 3/4" taller, but I don't really care about that now, they look better and when I get boosted next month they'll pay off.
|
|
|
|
|
|
#5 |
![]() Drives: Chevy camaro zl1 Join Date: Sep 2020
Location: Tucson
Posts: 14
|
Have you ever tried to
Launch in first gear? What RPM at your Launching in 2nd gear? |
|
|
|
|
|
#6 | |
![]() Drives: Chevy camaro zl1 Join Date: Sep 2020
Location: Tucson
Posts: 14
|
Quote:
|
|
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,560
|
__________________
2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
|
#8 |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,198
|
Yes…and I spin. First gear is too steep…maybe if I did a 15” rear conversion but I don’t have good luck trying 1st with my 17” drag pack. I’m simply way more consistent and spin way less launching in 2nd. No RPM build up, I just hit the gas starting in 2nd.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|