[Cleancoupe]

'm looking to get my new CSP headers coated before I put them on the car and would like some real user opinions between some different options.

So far I've gotten some prices for Jethot ($430 standard coating & $1050 for there ultra) and Swain Tech ($450 white lightning).

I know the Jethot will be prettier than the Swain Tech, but I could also just end up painting the Swain Tech with some high temp paint. I'm not really concerned about what they look like because for the most part you can't even see the headers, but more interested in a coating that will work well on keeping the heat out of the engine bay.

Jannetty Racing had recommended using Central Connecticut Coating which is who they use.

Car is mostly used for street driving, but will see the occasional road coarse.

Thanks for any help on helping me decide.

[Z OH 6]

https://www.camaro6.com/forums/showthread.php?t=606000

[DaveC113]

Swaintech are a bunch of d-bags, would not recommend.

They overcharged me and got their coating inside a carefully ported and polished manifold, total garbage job, garbage company. Look elsewhere.

[Joshinator99]

Originally Posted by DaveC113

Swaintech are a bunch of d-bags, would not recommend.

They overcharged me and got their coating inside a carefully ported and polished manifold, total garbage job, garbage company. Look elsewhere.

My brother was very unhappy with their work as well on his 880 WHP Z06. Not the first time I’ve heard this about Swaintech either.

I used Central Connecticut Coating on my 2” stainless headers and they did a nice job.

[Cleancoupe]

Originally Posted by Joshinator99

My brother was very unhappy with their work as well on his 880 WHP Z06. Not the first time I’ve heard this about Swaintech either.

I used Central Connecticut Coating on my 2” stainless headers and they did a nice job.

Thanks. I think I’m going to go with Central Connecticut Coating