|
|
#1 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
Toyo R888R 14-day Test Period
I've purchased Toyo R888R rears, 325/30R19. I've got two weeks to decide whether to keep or return them. I'll do a 2-day T&T at the end of two weeks.
I would use them on open roads and at the strip, but they are primarily considered road course tires. Several modified Lambos weighing 3500# race them here. I did some nannies-off 60-130 today and didn't feel them spin [like 4S] or vibrate [like MT]. Very impressive, but I did hear a little bit of tread noise. Given the supply issues, I might order the 555RII now just in case I take the Toyos back. Anyone here have experience with them?
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: |
|
|
|
|
|
#2 |
![]() Drives: 2020 Rally Green ZL1-1LE Join Date: May 2020
Location: Illinois
Posts: 501
|
I like them but I havent used the nittos before. They seem to hook great on my stock ZLE above 45 degrees and 35 mph. My only complaint is they howl like a 4X4 tire. As long as I do a good 5 sec. burnout at the dragstrip, they dead hook from a dig. Best 60' of 1.69.
|
|
|
|
|
|
#3 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: |
|
|
|
|
|
|
#4 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,152
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
#5 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
Quote:
Update Ordered the NT01 325/30ZR19 today and will drive the R888R until they arrive. The R888R's tread is designed for cornering/ racing I don't' do. UPDATE: I stayed with the R88Rs.
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: Last edited by JSH; 06-05-2022 at 09:33 AM. |
|
|
|
|
|
|
#6 |
![]() Drives: A10 ZL1 Join Date: Mar 2018
Location: Longview, Texas
Posts: 142
|
I had zero luck with Nitto’s. Yes my car is loud but I don’t get bothered by road noise with the Toyo’s
|
|
|
|
|
|
#7 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
I heard the Toyos work okay but wear really fast. They are the go to with ZL1 crowd. With the 17" setup on my A10 ZL1I ran a few 11.1s.
__________________
"Democracy Dies in Darkness" |
|
|
|
|
|
|
#8 |
![]() ![]() Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 926
|
I'm running Nitto 555RII (newer version of regular 555R). They hold the power well, they aren't loud, and you won't die if they get wet. I wouldn't believe they are a DR based on how streetable they are. I'm not a Nitto fan but I'd buy another set.
I'm currently using 55RII on the rear in 345/30R19 on 12" wide wheels along with 305/30R19 PS4S on the front.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
|
|
|
|
#9 | |
|
PKG4U
|
Quote:
__________________
2020 Camaro LT1. Bought 10/2020 | GM PERF. CAI | GM Muffler Delete (Performance Exhaust 4” tips). | SOLD 1/2022|
2018 ZL1 Summit White | Bought 1/2022 | PDR, Recaros, Carbon Dash, WeaponX Hx System, Apex SM-10 in ZLE fitment w/PS4S Mods after Warranty “Imma keep it stock” ![]() |
|
|
|
|
|
|
#10 |
![]() Drives: 1SS Summit White 6 speed Join Date: Jul 2017
Location: Gainesville GA
Posts: 582
|
888R's are deafening
Lol Road noise is ridiculous BUT these tires are so damn sticky Keep you going straight too Just make sure you heat them up some first
__________________
16 1SS M6 White
Magnuson 2.3 Heartbeat Roto Fab Solo Performance Cat deletes and Axleback Hurst short shifter #'s coming soon Riaction coilovers 1LE sway bars BMR mm BMR chassis brace Flow one 19" wheels wrapped in Mickey Thompsons 02 Z28 M6 35th anniversary 80k miles T-tops Leather Bolt ons Joy to drive this classic every day! Daily Driver |
|
|
|
|
|
#11 |
![]() Drives: None Join Date: Apr 2022
Location: Texas
Posts: 36
|
|
|
|
|
|
|
#12 | |
![]() ![]() Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 950
|
Quote:
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
|
|
|
|
|
|
#13 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: |
|
|
|
|
|
|
#14 |
|
Moderator
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 6,204
|
No offense, but do you not know what 8043 DA means…?
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|