|
|
#1 |
![]() Drives: Chevy Camaro ZL1 1LE Join Date: Sep 2021
Location: Indiana
Posts: 36
|
Drag Set for Rear - Size Question
https://www.speedwaymotors.com/Weld-...65,467277.html
Would this rim require any modifications to the rear of the ZL1 1LE? Also, would I be looking at a 305/45/17 tire for this rim? |
|
|
|
|
|
#2 |
|
Petro-sexual
|
Some of Welds' wheels come with extra caliper clearance. I forget what they call it, but that's something to look in to.
Aside from that, there are threads that have the information you're looking for. I run some cheap Drag Stars in a 17 x 10 with the 305s you've already noticed. I can tell you the caliper clearance is almost non-existent. There are labels on the calipers, from the factory, and the wheels have rubbed the labels on both calipers. That's pretty tight. These don't have the clearance of the Welds I've heard about though. I didn't have to modify anything else, though, minus the harness relocation in the driver's side wheel well that is common.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
#3 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,192
|
Quote:
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,192
|
You've got two threads going on this topic.
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq |
|
|
|
|
|
#5 | |
![]() Drives: Chevy Camaro ZL1 1LE Join Date: Sep 2021
Location: Indiana
Posts: 36
|
Quote:
|
|
|
|
|
|
|
#6 |
![]() Drives: Chevy Camaro ZL1 1LE Join Date: Sep 2021
Location: Indiana
Posts: 36
|
|
|
|
|
|
|
#7 |
|
Red Bull
Drives: 2017 Chevy ZL1 Join Date: Dec 2020
Location: Evansville, IN
Posts: 186
|
You want the High Pad version from Weld.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|