Magnaflow axle back system

Drnick · 01-16-2022, 03:34 PM

Has anyone installed this system?
And if so, any pros or cons.

*radz28* · 01-16-2022, 03:49 PM

You're only going to get a sound difference, until you start pumping more than 800 WHP.

The only experience that I've had with Magnaflow is a muffler that came on a truck I bought. It rotted through in less than a decade. For being stainless, I expected better lift. I don't know if that's a common thing with their products, but that's my experience.

*Joshinator99* · 01-16-2022, 04:29 PM

Quote:

Originally Posted by Drnick

Has anyone installed this system?
And if so, any pros or cons.

The part throttle drone was pretty bad… AWE Touring has zero drone was a big improvement over the Magnaflow axle back, IMO.

Warrior102 · 01-16-2022, 07:34 PM

Get the AWE, better grade of stainless and better sound.

JSH · 01-16-2022, 07:56 PM

Quote:

Originally Posted by Drnick

Has anyone installed this system?
And if so, any pros or cons.

I actually tried to order their system for my ZLE six months ago, but it was on a long long backorder.

Drnick · 01-16-2022, 08:12 PM

I’ve installed magnaflow on a Supra, excellent product,
I’ve checked out AWE’s website, and from what
I’ve seen, there axle back system,has no
Exhaust valve’s whereas the magnaflow has
Provision to install the oem exhaust valve actuators.

ChadSZL1 · 01-16-2022, 08:14 PM

I have the AWE touring and love it! No drone, awesome sound, and great quality!

arpad_m · 01-16-2022, 09:58 PM

I'm sure AWE's system is good, but no valves, no sale as far as I'm concerned. One of these days I'll swallow the bitter price tag and get me a Corsa exhaust.

Camaro1973 · 01-16-2022, 10:49 PM

The magnaflow has awful drone. If your want valves get the Borla s-type.

Drnick · 01-17-2022, 01:49 PM

Borla list a catback for coupes, but no
Catback, nor axle back for verts

JSH · 01-17-2022, 04:51 PM

Kooks AB here. Sounds awesome outside. Drones inside between say 1800-2200, so I just downshift one gear, no drone.

Camaro1973 · 01-17-2022, 07:05 PM

Quote:

Originally Posted by Drnick

Borla list a catback for coupes, but no
Catback, nor axle back for verts

Im pretty sure theres been quite a few people here with borla systems on verts and i believe they said they all fit. May want to wait for someone to chime in that has one.

XXX ZL1 · 01-17-2022, 08:44 PM

The NPP Corsa is pretty nice as well. No drone and is pretty quiet with valves closed while being wild with valves open.

gotswap · 01-19-2022, 08:22 AM

have a look at the AFE system

01-16-2022, 03:34 PM	#1
Drnick Drives: 22’ ZL1 Join Date: Dec 2021 Location: Florida Posts: 450 View My Garage	Magnaflow axle back system Has anyone installed this system? And if so, any pros or cons.

01-16-2022, 03:49 PM	#2
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,855 View My Garage	You're only going to get a sound difference, until you start pumping more than 800 WHP. The only experience that I've had with Magnaflow is a muffler that came on a truck I bought. It rotted through in less than a decade. For being stainless, I expected better lift. I don't know if that's a common thing with their products, but that's my experience. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

01-16-2022, 09:58 PM	#8
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 13,476 View My Garage	I'm sure AWE's system is good, but no valves, no sale as far as I'm concerned. One of these days I'll swallow the bitter price tag and get me a Corsa exhaust. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle Terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

01-16-2022, 10:49 PM	#9
Camaro1973 Drives: 2019 ZL1 Join Date: Mar 2019 Location: NJ Posts: 1,537	The magnaflow has awful drone. If your want valves get the Borla s-type. __________________ 928rwhp - 93 \| 1040rwhp/898rwrq - E65 SAE LME 377 LT4 Short Block \| Magnuson 2650 80mm upper w/13% lower (9.06) \| DSX Lid & Valve Covers \| CSP Custom Cam w/32% fuel lobe \| CID Heads \| NW 103mm TB \| Roto Fab Big Gulp \| CSP 2" Headers w/Green GESI Gen 2 Cats \| Borla 3" Full Cat Back w/ S-Type\| Mighty Mouse Wild Catch Can\| Custom Holley Low side Fuel system\| TooHigh PSI Port Injection w/Holley Controller \| Forced Inductions Interchiller w/2 gallon fender tank \| TK Performance built 10L90

01-17-2022, 04:51 PM	#11
JSH Drives: '20 ZLE Join Date: Jun 2020 Location: Mile High Posts: 4,195	Kooks AB here. Sounds awesome outside. Drones inside between say 1800-2200, so I just downshift one gear, no drone. __________________ 2020 ZL1LE A10. LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq

01-16-2022, 07:34 PM	#4
Warrior102 USCG Retired (MKC) Drives: 2018 2SS 1LE Black Join Date: Aug 2018 Location: Cape Cod Posts: 679	Get the AWE, better grade of stainless and better sound.

01-16-2022, 08:12 PM	#6
Drnick Drives: 22’ ZL1 Join Date: Dec 2021 Location: Florida Posts: 450 View My Garage	I’ve installed magnaflow on a Supra, excellent product, I’ve checked out AWE’s website, and from what I’ve seen, there axle back system,has no Exhaust valve’s whereas the magnaflow has Provision to install the oem exhaust valve actuators.

01-16-2022, 08:14 PM	#7
ChadSZL1 Red Bull Drives: 2017 Chevy ZL1 Join Date: Dec 2020 Location: Evansville, IN Posts: 186	I have the AWE touring and love it! No drone, awesome sound, and great quality!

01-17-2022, 01:49 PM	#10
Drnick Drives: 22’ ZL1 Join Date: Dec 2021 Location: Florida Posts: 450 View My Garage	Borla list a catback for coupes, but no Catback, nor axle back for verts

01-17-2022, 08:44 PM	#13
XXX ZL1 Drives: 2024 ZL1 M6 Join Date: Sep 2018 Location: Pace FL Posts: 449	The NPP Corsa is pretty nice as well. No drone and is pretty quiet with valves closed while being wild with valves open. __________________ 2024 Riverside Blue ZL1 M6 Magnuson 2650R, NW 103, Roto Fab Big Gulp Kooks 2 inch LT's, Stainless Works Legend NPP THP Billet Valve Covers, Mighty Mouse Wild CC Signature Forged 20x10.5/20x11.5, BMR springs, BMR Cradle lockout, AAD Billet arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold

01-19-2022, 08:22 AM	#14
gotswap Drives: 2019 ZL1 Crush Join Date: Jan 2019 Location: Colorado Springs Posts: 564	have a look at the AFE system __________________ 2019 Crush A10 E-Force 2650 670WHP 615WTQ All besides the 2650 is bone stock down to the air filter.

User Name		Remember Me?
Password