|
|
#1 |
![]() Drives: 2018 Camaro 1SS 1LE Join Date: Jun 2021
Location: Michigan
Posts: 447
|
Corbeau 4pt harness w/o cage
Just installed the Corbeau 4 point harness for track days in my SS 1LE. It worked out a bit better than I expected. I used the existing bolts of the seat belt buckle, and the seat belt in the back seat. Angles look ok to me, set up feels very similar to the 4pt harness I used in my previous Mustang, and BMW M2.
I ran this season with the seatbelt all the way out, then slowly in trick, and it wasn't enough. Will use this setup with a HANS III device. |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 10,134
|
i know alot of groups out here wont allow a 4 point even with a harness bar either stock seat belt or 5/6 point harness you doing track or just auto x?
__________________
|
|
|
|
|
|
#3 |
![]() Drives: 2018 Camaro 1SS 1LE Join Date: Jun 2021
Location: Michigan
Posts: 447
|
Track days only. No AutoX. None of the groups I run with care what harness you have. One requires a HANS device to run in the advanced group. And I like the Simpson HANS III, but I need over the shoulders harness to use it.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|