What did you do to your 6th Gen Camaro today?! - Page 783

jamala00 · 10-28-2021, 07:53 AM

Quote:

Originally Posted by zaimer

Don't remind me.

A local place here is having their final bike night tonight. I was going to brave the temperatures on the way home, but now it is also almost guaranteed rain... so I think the bike is done for the season. I'm thinking after this weekend or so, the car and bike will be cleaned/parked for the winter.

I just cleaned the boat Wednesday evening, and put into storage last night.

My bike is getting tucked away this weekend. I don't ride anymore in temps 50 or under. I'll keep the Camaro out until I see the forecast predict accumulating snow that I know they'll salt the roads. Then I'll put it away. I have all season tires on mine, so I'm not concerned about temps for summer only tires. A big reason for me for buying the Camaro was because I wanted to be able to enjoy a bit more of the fall/spring since I don't ride the Harley in temps under 50. I'm hoping we have a mild Nov/Dec and we don't get salt dumped until Mid Dec. Fingers Crossed.

willzilla · 10-28-2021, 10:14 AM

Installed a TackForm Headrest Mount for GoPro & Other Action Cameras into my 21 ZL1

willzilla · 10-28-2021, 10:25 AM

Also washed the car, lol.. Took what felt like forever!

Hrothgar · 10-28-2021, 10:33 AM

Installed the Soler 76mm Throttlebody yesterday and started the ECU Familiarization Process with the new hardware. No Codes thrown yet. This weekend follows the Cold Air Inductions CAI and soon thereafter, the Soler SE0525-DLX throttle controller, which should round out my very modest set of performance Mods.

BLACK21SS · 10-28-2021, 11:34 AM

Quote:

Originally Posted by willzilla

Also washed the car, lol.. Took what felt like forever!

That’s the car I wish I had bought. Beautiful.

willzilla · 10-28-2021, 11:39 AM

Quote:

Originally Posted by BLACK21SS

That’s the car I wish I had bought. Beautiful.

Thank you! <3

hotlap · 10-29-2021, 03:13 PM

Installed the Interior Foot-Well Lighting - GM (23248208)

The install wasn't that difficult. Putting the rear screws back in to install the passenger insulator panel was the hardest part (contortion in order to see the holes. I wore a LED band headlight so I could see everything easily.

https://www.gmpartsdirect.com/oem-pa...hting-23248208
Name: 1.png
Views: 749
Size: 181.8 KB

arpad_m · 10-29-2021, 03:39 PM

Quote:

Originally Posted by hotlap

Installed the Interior Foot-Well Lighting - GM (23248208)

The install wasn't that difficult. Putting the rear screws back in to install the passenger insulator panel was the hardest part (contortion in order to see the holes. I wore a LED band headlight so I could see everything easily.

https://www.gmpartsdirect.com/oem-pa...hting-23248208
Attachment 1083207

We're fellow footwell sufferers then

Lying on my back, head stuck in the footwell, legs up on the seat, I cursed the day I'd bought this kit (and I needed a little help with the last bolt, I just couldn't take it anymore).

The end result is definitely worth it, though.

hotlap · 10-29-2021, 06:27 PM

Quote:

Originally Posted by arpad_m

We're fellow footwell sufferers then

Lying on my back, head stuck in the footwell, legs up on the seat, I cursed the day I'd bought this kit (and I needed a little help with the last bolt, I just couldn't take it anymore).

The end result is definitely worth it, though.

I had them in my 2016 (ordered with car LPO) and missed them while I had the 18. I bought this kit in June and kept putting off the installation. Now that the days are shorter I bit the bullet.

I was dreading doing this but it turned out to not be too bad. I was face up, feet on ground, with my back arched to see those rear insulation panel bolts.

I took me about 90 minutes total and I was taking my time. If you are handy and fit, it’s doable.

UnknownJinX · 10-29-2021, 06:27 PM

I did the brake pads last week as I needed to rotate the tires.

The fronts are pretty much toast. They wear a bit unevenly so there are areas that only have 1 mm of pad left so I am glad I got them in time. The rears are also done even though they aren't that worn out, but worn enough that if I head to track days, the tech inspection might give me some trouble.

Quote:

Originally Posted by arpad_m

We're fellow footwell sufferers then

Lying on my back, head stuck in the footwell, legs up on the seat, I cursed the day I'd bought this kit (and I needed a little help with the last bolt, I just couldn't take it anymore).

The end result is definitely worth it, though.

Yeah the installation is pretty annoying. Make sure to take breaks in between unless you want to break your back.

2SS Capt · 10-29-2021, 07:59 PM

Quote:

Originally Posted by UnknownJinX

Make sure to take breaks in between unless you want to break your back.

So we need to be sure to take breaks while doing our brakes so as not to break our back doing the brakes???

hotlap · 10-30-2021, 01:11 PM

Got the Sottozero’s mounted today. They’ll go on the car Thanksgiving weekend

Name: 84804EC2-4303-422E-8D59-6F5EE6165938.jpeg
Views: 712
Size: 396.4 KB

Name: 84804EC2-4303-422E-8D59-6F5EE6165938.jpeg
Views: 712
Size: 396.4 KB

Name: 73640A3C-4CE7-49CE-BAE1-D3ED9771981A.jpeg
Views: 712
Size: 497.7 KB

sequal · 10-30-2021, 10:06 PM

It was a few days ago now, but a storm took out my power and internet just after completing it.

Fitted my Roto-Fab intake, been meaning to get this done for so long now.

Name: IMG_2140.jpg
Views: 688
Size: 228.0 KB

Name: IMG_2140.jpg
Views: 688
Size: 228.0 KB

2SS Capt · 10-30-2021, 10:26 PM

Rolled over to 5,000 miles today, not bad for owning the car for just over 21 months (took delivery with 3 miles on the clock).

10-28-2021, 10:25 AM	#10951
willzilla D3RPZILLA Drives: 2021 Camaro ZL1 a10 Join Date: Aug 2020 Location: San Antonio, TX Posts: 751 View My Garage	Also washed the car, lol.. Took what felt like forever! __________________ 2021 Camaro ZL1 Satin Steel w/a10/PDR/CF/Red Belts/Navigation Website: z1lla.com \| YouTube: sub.z1lla.com \| Merch: Shop & Etsy YouTube Playlists: Performance Mods \| Show Mods \| Other Mods

10-29-2021, 03:13 PM	#10955
hotlap Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014 Location: Franklin WI Posts: 6,634	Installed the Interior Foot-Well Lighting - GM (23248208) The install wasn't that difficult. Putting the rear screws back in to install the passenger insulator panel was the hardest part (contortion in order to see the holes. I wore a LED band headlight so I could see everything easily. https://www.gmpartsdirect.com/oem-pa...hting-23248208 __________________ "the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan -

10-30-2021, 01:11 PM	#10960
hotlap Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014 Location: Franklin WI Posts: 6,634	Got the Sottozero’s mounted today. They’ll go on the car Thanksgiving weekend __________________ "the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan -

10-30-2021, 10:26 PM	#10962
2SS Capt 2020 Shadow Gray 2SS Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019 Location: SoCal Posts: 3,692	Rolled over to 5,000 miles today, not bad for owning the car for just over 21 months (took delivery with 3 miles on the clock). __________________ 2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Fender Badge, Footwell Lighting *After delivery:* - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Pedals, SS Wheel Caps, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF-Full Front & Rockers, 35% Tint, CeramicPro coated, RST Stainless Brake Lines, Castrol SRF, MSD Plug Wires, Mamo V3 Ported TB *Left: My "fun" ride (455 HP). Right: My "work" ride (52,000 HP): a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph. BOTH AWESOME to operate...*

10-28-2021, 10:33 AM	#10952
Hrothgar Drives: 1971, 1973, 2002 Camaro Join Date: May 2021 Location: FL Posts: 48	Installed the Soler 76mm Throttlebody yesterday and started the ECU Familiarization Process with the new hardware. No Codes thrown yet. This weekend follows the Cold Air Inductions CAI and soon thereafter, the Soler SE0525-DLX throttle controller, which should round out my very modest set of performance Mods.

10-30-2021, 10:06 PM	#10961
sequal Drives: 2019 Camaro 2SS Join Date: Jun 2019 Location: Melbourne Australia Posts: 43	It was a few days ago now, but a storm took out my power and internet just after completing it. Fitted my Roto-Fab intake, been meaning to get this done for so long now.

User Name		Remember Me?
Password