[R2R martini]

does anyone use the new Ferodo 3.12? what's the part number if yes. thank you.

[TrackClub]

Originally Posted by R2R martini

does anyone use the new Ferodo 3.12? what's the part number if yes. thank you.

Sorry cannot be of help re part number, but just wanted to chime in in terms of this specific pad being very high torque. It will put out a lot of heat, be far from ideal for stock tires, ABS, etc.
Do you have much experience running stock pads? Cheers!

[R2R martini]

Originally Posted by TrackClub

Sorry cannot be of help re part number, but just wanted to chime in in terms of this specific pad being very high torque. It will put out a lot of heat, be far from ideal for stock tires, ABS, etc.
Do you have much experience running stock pads? Cheers!

actually i went with Ferodo 2500. it is a street/track crossover and less noisy.

[TrackClub]

Originally Posted by R2R martini

actually i went with Ferodo 2500. it is a street/track crossover and less noisy.

Good choice. Not sure where ya got them, but just Fyi Strano carries them at good prices.
Surprised you find stockers to be noisy, as mine don't make any noise at all. Hmmm...

[R2R martini]

Originally Posted by TrackClub

Good choice. Not sure where ya got them, but just Fyi Strano carries them at good prices.
Surprised you find stockers to be noisy, as mine don't make any noise at all. Hmmm...

thanks, got it from apex. i think it was around $521 for F&R.
Stocks don't make any noise. my son just wanted to have better initial bite so we will try the 2500's.

[TrackClub]

Originally Posted by R2R martini

thanks, got it from apex. i think it was around $521 for F&R.
Stocks don't make any noise. my son just wanted to have better initial bite so we will try the 2500's.

Ok got ya!

[Fast Ken]

Has anyone come across directional brake pads??? These are my new replacement OEM rear pads. Notice the arrows on the 2 pads with the metal wear sensors. I replaced the fronts and then went back to them to double check for arrows after seeing these for the rear.

[Mountain]

Originally Posted by Fast Ken

Has anyone come across directional brake pads??? These are my new replacement OEM rear pads. Notice the arrows on the 2 pads with the metal wear sensors. I replaced the fronts and then went back to them to double check for arrows after seeing these for the rear.

Attachment 1081276

Those arrow are there to help installation placement for the pads with the wear indicators. Realistically, you can place the pads wherever, they will work the same, you just may not be able to see the wear indicator, which is intended to be on the outside pad so you can see it.

[ZapperZ]

Ferodo FRP3133G Front
Excellent stopping power
I have a few new front sets that I'm going to put up because I went with AP Racing 390 kit
And yes with DS3.12 Pads!

[kropscamaro16]

just did my 3rd day on the hawk dtc60 and yea not a fan of them might have to replace rotors next year so not sure what im going to do maybe the ferodo or porterfield race pads

[5.M0NSTER]

Originally Posted by kropscamaro16

just did my 3rd day on the hawk dtc60 and yea not a fan of them might have to replace rotors next year so not sure what im going to do maybe the ferodo or porterfield race pads

What don't you like about them? Just curious as I also have 3 days on mine. They are about 50% worn at this time, and I also have some thoughts, but curious what you think.

[ZapperZ]

I'll get you rear part number the pads are in my car trailer

[kropscamaro16]

Originally Posted by 5.M0NSTER

What don't you like about them? Just curious as I also have 3 days on mine. They are about 50% worn at this time, and I also have some thoughts, but curious what you think.

first track day with them the abs was kicking on hard and im not a fan of the modulation on streets they arent bad but my front rotors look pretty beat up from only 3 track days so far...

[ZapperZ]

Ferodo ds3.12 rear pads
FRP3137G