|
|
#1 |
![]() Drives: 21 LT1 RS M6 in SSM Join Date: Jul 2009
Location: Dupont, WA
Posts: 453
|
Rubber trunk mat for 6th Gen; Cargo net
I asked this in another section with less traffic and have not received any replies yet, so thought I would try the General section.
For my 2010, I had a GM accessory rubber trunk mat from day 1. It fit great, was heavy pliable rubber and really helped keep things from sliding around. Probably added sound insulation, too. And now that I have my car and have seen how "flimsy" the trunk floor/lid thing is, I want one even more! But it seems GM doesn't have one like that for the 6th Gen. Or am I missing it? Weathertech makes one, but based on their floor mats, I think it is probably less rubber-like and more hard plastic-like. Lloyd's look great, but I think they only have carpeted ones and I like the rubber (stops water, oil, dirt, etc.). I also have a cargo web net for my 2010 and will try that in the new 2021. Anyone know already if it is sized about right to work well? Any suggestions? Thanks. Rob |
|
|
|
|
|
#2 |
![]() Drives: 2015 Chevrolet Camaro 1lt Join Date: Feb 2015
Location: United States
Posts: 73
|
I got one with my Camarillo. Fit is good… was pricey though
Sent from my iPhone using Tapatalk |
|
|
|
|
|
#3 |
![]() Drives: 2022 SS 1LE Join Date: Dec 2020
Location: Metro Detroit
Posts: 222
|
__________________
Alpha Platform Aficionado
2022 Camaro SS 1LE | Rapid Blue | Manual Cadillac ATS 3.6 RWD | Daily Driver Previous: Challenger Scat Pack Widebody |
|
|
|
|
|
#4 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,622
|
Quote:
http://www.camaro6.com/forums/showth...ight=cargo+net The cargo nuts are M6. I used M6 bolts to replace the pushpins and nuts to secure them. Don't remember the length. I think they were 35mm. Shop around for the cargo nuts. Should be able to find them for around $6-7 ea. I got mine from eBay but it was about 4 years ago.
__________________
|
|
|
|
|
|
|
#5 |
|
D3RPZILLA
|
I went with weather tech and it's like a thick rubber type of material and fits perfectly. It also has a lip around the edge to keep anything you may spill from sloshing over the edge onto your floor.
![]() ![]() Sent from my SM-G998U using Tapatalk
__________________
2021 Camaro ZL1 Satin Steel w/a10/PDR/CF/Red Belts/Navigation
Website: z1lla.com | YouTube: sub.z1lla.com | Merch: Shop & Etsy YouTube Playlists: Performance Mods | Show Mods | Other Mods ![]() |
|
|
|
|
|
#6 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014
Location: Franklin WI
Posts: 6,637
|
Quote:
I also have the gen6 mat from WeatherTech that I used in my 16 and 18 for five years. It was fine, just looked worn. Not as heavy duty as the GM one.
__________________
"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - |
|
|
|
|
|
|
#7 | |
|
Account Suspended
Drives: My wife nuts... Join Date: Sep 2011
Location: NWFL
Posts: 248
|
Quote:
Dealer gave me the above mat for free. I like it better than the weathertech in my other vehicle |
|
|
|
|
|
|
#8 |
|
Faster!!!
Drives: 2020 Camaro 1SS 1LE Join Date: Mar 2020
Location: Long Island NY
Posts: 1,004
|
Nice!!! I'll have to get me one of those!!!!
|
|
|
|
|
|
#9 |
![]() Drives: 2021 SS 1LE SHOCK Join Date: Mar 2021
Location: Austin
Posts: 136
|
I like the lip on the weather tech. I always afraid of spilling a liquid and frying all the electronics under there.
|
|
|
|
|
|
#10 |
![]() ![]() ![]() Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,091
|
yes this one. i have the matching all weather set for the interior too. the set has now been in both my 6th gens
__________________
|
|
|
|
|
|
#11 |
![]() Drives: 21 LT1 RS M6 in SSM Join Date: Jul 2009
Location: Dupont, WA
Posts: 453
|
Great! Thanks everyone for the info. I did not see the GM one when I looked at the accessories on the Chevrolet site. That is what I'm looking for!
Rob |
|
|
|
|
|
#12 |
![]() ![]() Drives: 2002 z28, 2023 Zl1 Join Date: Sep 2012
Location: Florida
Posts: 866
|
Husky liners makes floor mats and trunk mats too
|
|
|
|
|
|
#13 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014
Location: Franklin WI
Posts: 6,637
|
Regarding the cargo net.
I've put one on all three of my 6th gens. So small that it's damn near useless but still convenient for little things
__________________
"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - |
|
|
|
|
|
#14 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 13,440
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|