What did you do to your 6th Gen Camaro today?! - Page 752

sandm · 07-15-2021, 12:21 PM

Quote:

Originally Posted by Cyrus

This is why I haven't done this mod, looks difficult.

this was me. have had them in the garage for a month..

Quote:

Originally Posted by Aaron07

It’s not the easiest, but use some electrical tape and tape the screws to the end of your screwdriver to prevent them from falling off. (Old electricians trick)

best trick I have learned this week. I just tackled this job and took me 15 minutes start to finish with this trick.
downside tho are that the original screws didn't come out. they are stuck on the valance. have a magnet on a stick handy.

thx for the tip!!

enzia35 · 07-15-2021, 03:29 PM

This all the same month that I’m getting new wheels and tires:

Flat tire may not be repairable, the curbed one is okay, this is just the first time ever that I’ve curbed a wheel. And it was a doozy.

I would hate to have to order a tire when I’ll be replacing them at the end of the month.

Speak99 · 07-15-2021, 03:33 PM

Wash and wax and pics with firebird.

2SS Capt · 07-15-2021, 05:45 PM

Added an additional ground cable to help with the slow crank/hot engine issue...

Bought the cable from BatteryCablesUSA, 21" 0 Gauge (1/0), 3/8" connectors (M10): $12.81 + $3.97 shipping = $16.78 + $3.18 at Home Depot for a new bolt, nuts and washers... Total: $19.96 installed, took about 10 minutes...

yeehaw · 07-16-2021, 02:10 AM

Name: IMG_2808.jpg
Views: 767
Size: 197.7 KB

Name: IMG_2810.jpg
Views: 790
Size: 229.2 KB

Name: IMG_2820.jpg
Views: 793
Size: 221.4 KB

Infamus · 07-16-2021, 09:39 AM

Quote:

Originally Posted by yeehaw

Attachment 1074222
Attachment 1074223
Attachment 1074224

looks great!

KenMaro · 07-16-2021, 10:39 AM

Quote:

Originally Posted by yeehaw

Attachment 1074222
Attachment 1074223
Attachment 1074224

Looks great!
Someday I will do this... I am just not confident enough to tackle the job yet. Someday.

Blade21 · 07-16-2021, 11:29 AM

Order a new set of wheels and tires.

Went with the MRR 017.

2SS Capt · 07-16-2021, 02:00 PM

Quote:

Originally Posted by Blade21

Order a new set of wheels and tires.

Went with the MRR 017.

I'm assuming 10" fronts and 11" rears? Gloss black or Gunmetal?

Let me know how you like them, I'm contemplating these same wheels when it comes time for tires... I love the 1LE rims...

Chutzpah · 07-16-2021, 02:13 PM

Quote:

Originally Posted by yeehaw

Attachment 1074222
Attachment 1074223
Attachment 1074224

That looks great! Any tips on how to remove the bumper? (it looks like you have to be a bit heavy handed to release the clips, which makes me cringe) I have the general idea, based on looking at a 2016-2018 video. Possibly will pull mine to re-adjust the aluminum car crash bar upward, so hopefully there’s less gap at the corners.

hotlap · 07-16-2021, 02:56 PM

Quote:

Originally Posted by 2SS Capt

I'm assuming 10" fronts and 11" rears? Gloss black or Gunmetal?

Let me know how you like them, I'm contemplating these same wheels when it comes time for tires... I love the 1LE rims...

In the link below, I posted pictures of the MRR M017 wheels next to new 1LE wheels. You can see they compare. Really good IMO

https://www.camaro6.com/forums/showp...91&postcount=5

Michael-k · 07-16-2021, 03:18 PM

Well, not what I did to it, but what I did for it.
Today is National Stick Shift Day -- which I thought it would be a great day to create an Instagram account for my ride.

I named it months ago -- Blue honey. The insta is @bluehoney3lt

Name: 0716211411a_HDR-R.jpg
Views: 613
Size: 92.8 KB

Name: 0716211411a_HDR-R.jpg
Views: 613
Size: 92.8 KB

kropscamaro16 · 07-16-2021, 03:42 PM

picking up my car after work added a roll bar/seat/harness and battery and catch can im excited!

Blade21 · 07-16-2021, 07:46 PM

Quote:

Originally Posted by 2SS Capt

I'm assuming 10" fronts and 11" rears? Gloss black or Gunmetal?

Let me know how you like them, I'm contemplating these same wheels when it comes time for tires... I love the 1LE rims...

Yes Sir. Gloss black.

Won’t be here until the 29th.

07-15-2021, 03:29 PM	#10516
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,449	This all the same month that I’m getting new wheels and tires: Flat tire may not be repairable, the curbed one is okay, this is just the first time ever that I’ve curbed a wheel. And it was a doozy. I would hate to have to order a tire when I’ll be replacing them at the end of the month. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

07-15-2021, 03:33 PM	#10517
Speak99 Drives: Camaro 2020 2SS VERT Join Date: Dec 2020 Location: Ontario Posts: 225	Wash and wax and pics with firebird. Attached Images

07-15-2021, 05:45 PM	#10518
2SS Capt 2020 Shadow Gray 2SS Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019 Location: SoCal Posts: 3,688	Added an additional ground cable to help with the slow crank/hot engine issue... Bought the cable from BatteryCablesUSA, 21" 0 Gauge (1/0), 3/8" connectors (M10): $12.81 + $3.97 shipping = $16.78 + $3.18 at Home Depot for a new bolt, nuts and washers... Total: $19.96 installed, took about 10 minutes... __________________ 2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Fender Badge, Footwell Lighting *After delivery:* - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Pedals, SS Wheel Caps, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF-Full Front & Rockers, 35% Tint, CeramicPro coated, RST Stainless Brake Lines, Castrol SRF, MSD Plug Wires, Mamo V3 Ported TB *Left: My "fun" ride (455 HP). Right: My "work" ride (52,000 HP): a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph. BOTH AWESOME to operate...*

07-16-2021, 02:10 AM	#10519
yeehaw Drives: 2019 Red Hot 2SS (RHD) Join Date: Nov 2019 Location: New Zealand Posts: 30	Replaced the Diffuser Valence __________________ 2019 Camaro 2SS (RHD) - Borla S-Type (NPP) Axle back, GM Performance CAI, Mishimoto Catch Can, Mild 2 Wild Exhaust Controller, Aluminium Paddle Shift Extensions, Diode Dynamics Side Marker LEDs, Hurst Pistol Grip Shifter, ZL1 Addons Rock Guards, STEK PPF Full wrap

07-16-2021, 11:29 AM	#10522
Blade21 Drives: '16 Camaro 2SS Join Date: Jul 2020 Location: Maryland Posts: 151	Order a new set of wheels and tires. Went with the MRR 017. __________________ '16 Camaro 2SS\| GT-30 Cam\| Kooks 1 7/8 Headers\| Borla X-Pipe Mid\| Mishimoto Thermostat\| Mishimoto Overflow tank\| Mishimoto Oil Catch Can\| Diode Side Markers\| ZL1 Addons Lift Pads\| GM Aluminum Pedals\| ROTOFAB Intake - Sound Delete\| SEMA grille

07-16-2021, 03:18 PM	#10526
Michael-k Drives: '21 Camaro Join Date: Nov 2019 Location: Hummelstown, PA Posts: 203	National Stick Shift Day Well, not what I did to it, but what I did for it. Today is National Stick Shift Day -- which I thought it would be a great day to create an Instagram account for my ride. I named it months ago -- Blue honey. The insta is @bluehoney3lt __________________ . DD: 2014 Chevrolet Equinox LT1 -- Silver ice, LFX, AWD, moonroof 2021 Chevrolet Camaro 3LT -- Riverside blue, LGX, M6, NPP, moonroof -- Insta @bluehoney3lt sold: 2000 Mercury Cougar -- V6, citrus gold, 5-speed, sunroof

07-16-2021, 03:42 PM	#10527
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 10,130	picking up my car after work added a roll bar/seat/harness and battery and catch can im excited! __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

User Name		Remember Me?
Password