|
|
#43 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
You know I need to go get a mount for my phone today and do the video thing.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
|
|
|
|
|
#44 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Didn’t go as planned. Did two pulls, but roads were to cold and fought traction because of it. But DA being low helped pull up top.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
|
|
|
|
|
#45 |
|
902HP 858TQ
Drives: 2018 ZL1 A10 Join Date: May 2018
Location: New Jersey
Posts: 135
|
I did a pull this morning too. This is on Toyo's and 93 octane. I was also having traction issues with the cool temps. Your car is fast Ron!
https://youtu.be/AfsFEGUqZzw |
|
|
|
|
|
#46 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
Nice rip brother, your car is really moving as well.
__________________
2017 ZL1 A10: 8.84 @ 156 PB
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
|
|
|
|
|
|
#47 | |
![]() ![]() ![]() ![]() ![]() Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Quote:
|
|
|
|
|
|
|
#48 |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Old thread. But I was messing with my draggy in warmer weather now that I have nittos to see just how bad hot weather affects times.
It was about 92 out with 80ish humidity. Pulled a 5.8 on first try. My usual is around 5.4 I’m around 65F weather. I didn’t try when any cooler as I didn’t have the nittos then and just spun. But a big difference in times when temps climb.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
#49 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
I'll get a 60-130 in the next few days. Perhaps a stock guy could do the same.
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: |
|
|
|
|
|
#50 |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
Stock is in the 8’s. Could even hit 9s in hot temps. I’ve seen high 7’s in like 45-50F temps stock.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
#51 |
![]() Drives: 2002 Camaro SS Join Date: May 2016
Location: Tomball, TX
Posts: 35
|
My 2018 A10 with just a RotoFab (no tune) intake did 8.4 with my draggy 60-130, temp was 84 degrees.
__________________
2018 ZL1 A10 | 2017 Ford Raptor | 2002 SS #2847 - Brembo - Koni - Recaro | 2000 SS #3825 - Huron Speed Turbo Build | 1986 Regal T-Type
|
|
|
|
|
|
#52 |
![]() ![]() ![]() ![]() Drives: 2008 Pontiac G8 GT, Shelby GT500 Join Date: Mar 2011
Location: Long Island, New York
Posts: 1,376
|
The stock GT500 runs low 7's to high 6's 60-130, what would it take for a ZL1 to run the same?
|
|
|
|
|
|
#53 |
![]() ![]() ![]() ![]() ![]() Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,537
|
A hundred more rwhp.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
|
|
|
|
|
#54 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
I'm too lazy to download and analyze the ODR file, but using the PDR video and my phone's stopwatch, rolling from 60 mph (not 0-130 in a flyby), starting at WOT and ending at 130, and averaging it 4 or 5 times, mine is 6.6-6.7 sec
DA ~8000 ft
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: Last edited by JSH; 07-11-2021 at 12:58 PM. |
|
|
|
|
|
#55 | |
![]() Drives: '17 ZL1 M6 Join Date: Apr 2021
Location: Earth
Posts: 108
|
Quote:
What's your whp?
__________________
'17 ZL1 M6
8xxwhp Magnuson 2650 |
|
|
|
|
|
|
#56 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,148
|
725 plus Stage II hp. Haven't dyno'd Stage II, but 40-50hp or so.
The correction factor was 22% this morning!!
__________________
2020 ZL1LE A10.
LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: |
|
|
|
|
|
|
|
|
Post Reply
|
|
|