Fuse blown after getting FBO's

Jrs2SS · 05-24-2021, 04:30 PM

Any one have issues after getting FBO's with fuses getting blown? My drivers side turn signal, dome light and backup camera not working after getting headers, rotofab CAI, IMO, throttle body and DSX flex fuel kit installed. Thanks

Mark114 · 05-24-2021, 05:37 PM

It sounds like a wire harness may not have been reconnected correctly after the installation or possibly was melted by being too close to the headers.

Jrs2SS · 05-24-2021, 06:12 PM

Thanks. Wil check that out.

RUPP250 · 05-24-2021, 08:19 PM

I would check the wiring near the harness where they added the pin for the Flex Fuel setup.

Who did your tuning? I'm in Livermore and just interested in who else local is tuning.

NickeyMatt1LE · 05-25-2021, 02:21 AM

Check the harness under the coolant reservoir. It needs to be slightly relocated when doing headers.

Jrs2SS · 05-25-2021, 09:12 AM

Quote:

Originally Posted by RUPP250

I would check the wiring near the harness where they added the pin for the Flex Fuel setup.

Who did your tuning? I'm in Livermore and just interested in who else local is tuning.

Thanks will check that out. I got my car mods and tuned by Aaron at Go Wraps in Fremont.

05-24-2021, 04:30 PM	#1
Jrs2SS Drives: Chevy Camaro Join Date: Aug 2019 Location: Bay area Posts: 6 View My Garage	Fuse blown after getting FBO's Any one have issues after getting FBO's with fuses getting blown? My drivers side turn signal, dome light and backup camera not working after getting headers, rotofab CAI, IMO, throttle body and DSX flex fuel kit installed. Thanks

05-24-2021, 05:37 PM	#2
Mark114 Drives: 2016 2SS Convertible Join Date: May 2012 Location: St. Louis, MO Posts: 1,780 View My Garage	It sounds like a wire harness may not have been reconnected correctly after the installation or possibly was melted by being too close to the headers.

05-24-2021, 06:12 PM	#3
Jrs2SS Drives: Chevy Camaro Join Date: Aug 2019 Location: Bay area Posts: 6 View My Garage	Thanks. Wil check that out.

05-24-2021, 08:19 PM	#4
RUPP250 Drives: 16 SILVER 2SS Join Date: Nov 2018 Location: Livermore Posts: 15	I would check the wiring near the harness where they added the pin for the Flex Fuel setup. Who did your tuning? I'm in Livermore and just interested in who else local is tuning.

05-25-2021, 02:21 AM	#5
NickeyMatt1LE Drives: 2017 Camaro SS 1LE Join Date: Apr 2019 Location: Chicago burbs Posts: 36	Check the harness under the coolant reservoir. It needs to be slightly relocated when doing headers.

User Name		Remember Me?
Password