You are browsing camaro6 
04-24-2021, 05:39 PM
|
#1 |
 Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 398
|
New wheels, liftpads and jack?
I've ordered some Forgestars with 285/305 setup for the 2021 LT1. I'm new to the camaro world last October, and i'm reading all these "lift pads" and "jack location" threads, and it's scaring the crap out of me! I've never had an issue swapping wheels on any car, ever!
What is the cheap route on a jack and pads to accomplish the wheel install without too much drama? thanks for any help, I know there are many threads on this, just none that say, I bought a jack at napa, and these lift pads, and all was well with the world! |
|
|
|
04-24-2021, 05:55 PM
|
#2 |
   
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,091
|
I bought a flat top low profile Jack from harbor freight and zl1 add ons jack pads and ESCO flat top Jack's.
I jack the rear up using cross brace between the gas tank and pumpkin. Place the two Jack's under rear jack pads. Lifting the front, I haven't exactly figured that out yet. Would be super easy if they're was a front jacking position in the center but I don't trust any of the aluminum there. For the time being I just use the jack on one of the front jack pads and put a jack on the pinch weld and do work on one wheel at a time.
__________________
 |
|
|
|
|
04-24-2021, 06:14 PM
|
#3 |
|
Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 398
|
Ok cool, I just bought a 3 ton low profile jack from Harbor. So now I need to locate the jack pads? Where are those things at and how do they install?
ZL1 addons seems to be sold out. ???? https://www.amazon.com/Dewhel-Billet...9306202&sr=8-1 sold out! ???? https://www.phastekperformance.com/Z...zl1a-01115.htm |
|
|
|
|
04-24-2021, 06:15 PM
|
#4 |
 
|
That sounds about right.
__________________
Straightaways are for fast cars...Turns are for fast drivers
|
|
|
|
|
04-24-2021, 06:20 PM
|
#5 | |
|
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,091
|
Quote:
__________________
|
|
|
|
|
|
04-24-2021, 06:43 PM
|
#6 |
|
Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 398
|
God damn i'm so confused. I need pucks to clear the plastics also? What are the magnetic ones you are referring to?
thanks so much guys. This is actually very crazy from chevy. maybe it's the beer talking, but WTF were these guys thinking at Chevy, you can't just pull a scissors jack out of any car trunk and swap wheels on this car? seriously, foolish. Last edited by DorsoDuroJohn; 04-24-2021 at 08:28 PM. |
|
|
|
|
04-24-2021, 07:15 PM
|
#7 | |
|
Drives: 2021 Camaro 1SS, 2012 Scion iQ Join Date: Jan 2021
Location: TX
Posts: 84
|
Quote:
The Amazon adapters they're talking about are like this: https://www.amazon.com/Fudoray-Anodi...dp/B083TJ5PFY/ The magnetic one they're talking about is probably this: https://zl1addons.com/collections/ca...ch-weld-magpad Amazon versions also exist. https://www.amazon.com/Byenins-Slott.../dp/B073SPYDFT I think I'd prefer the magnetic version, so you're not permanently attaching something to the underside of the car with set screws. |
|
|
|
|
|
04-24-2021, 07:30 PM
|
#8 | |
|
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,091
|
I hope this can help you visualize what I do.
__________________
|
|
|
|
|
|
04-24-2021, 08:06 PM
|
#9 |
|
Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 398
|
YES, that's helps greatly. You are a rock star! Thanks for providing that detail!
Thanks Aaron and Jax, I think I may be able to actually get what I need from your posts! |
|
|
|
|
04-24-2021, 08:13 PM
|
#10 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,102
|
The video is exactly how I do it too. I'm actually thinking about buying another set of jack pads from amazon, then I won't need the magnetic jack puck at all.
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth.  |
|
|
|
|
04-24-2021, 08:17 PM
|
#11 |
|
Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 398
|
OK, I've ordered this:
https://www.harborfreight.com/3-ton-...lue-56643.html and This: https://zl1addons.com/collections/ca...ch-weld-magpad do I still need this? https://www.amazon.com/dp/B01MQD0YXO..._t4_B073SPYDFT Last edited by DorsoDuroJohn; 04-24-2021 at 08:51 PM. |
|
|
|
|
04-24-2021, 08:47 PM
|
#12 | |
|
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,091
|
Quote:
__________________
|
|
|
|
|
|
04-24-2021, 08:50 PM
|
#13 |
|
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,102
|
The 2nd and 3rd links are the same.
I don't use those rubber pucks. Here's the magnetic jack pad. https://www.amazon.com/Potauto-Unive...e%2C203&sr=1-5 Here's the lift pads: https://www.amazon.com/gp/product/B0...A3OF82XRVO3DTV regarding the magnetic jack pad....i had to mount mine to a piece of wood so the jack would clear my side skirts. look at this and you'll see what i mean: https://zl1addons.com/collections/ja...-3-jack-magpad
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
|
|
|
|
04-24-2021, 08:51 PM
|
#14 |
|
Drives: 2021 Camaro LT1 Join Date: Oct 2020
Location: Minneapolis
Posts: 398
|
I've updated my duplicates. thanks!
Are you guys leaving the magnetic pads on the car at all times? It would appear I've only ordered quantity ONE for $40? Is that a solo or did I order a set? https://zl1addons.com/collections/ca...ch-weld-magpad |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
