ADM intercooler reservoir V2 pics - Page 6

Rnovrit · 02-21-2021, 11:02 AM

Quote:

Originally Posted by gtfoxy

Off topic, but did you do the coil covers yourself?

Details?

Nope. I purchased a second set and had my friends that own a body shop paint them red. I used the paint code for Red Hot (2018 Camaro red) as it was almost a perfect match to the calipers. With the red calipers and seatbelts I felt the engine bay needed a little something to tie it all together. I used an extra set so I could put my originals back on if I ever changed my mind.

willzilla · 02-22-2021, 03:23 AM

Does any good catch can fit with the reservoir in place? Such as the elite?

Sent from my GM1917 using Tapatalk

Z OH 6 · 02-22-2021, 04:28 AM

Quote:

Originally Posted by willzilla

Does any good catch can fit with the reservoir in place? Such as the elite?

Sent from my GM1917 using Tapatalk

Yes, the Mighty Mouse Wild can be mounted right behind the radiator.

20Bluezl1 · 02-25-2021, 10:25 AM

So I contacted ADM performance to see if we can get a group buy and they accepted I will ad a new thread with details.

ZX-10R · 02-25-2021, 01:33 PM

Quote:

Originally Posted by willzilla

Does any good catch can fit with the reservoir in place? Such as the elite?

If you install the Elite in front - they have a new, updated bracket for this

20Bluezl1 · 02-25-2021, 07:18 PM

Quote:

Originally Posted by willzilla

Does any good catch can fit with the reservoir in place? Such as the elite?

Sent from my GM1917 using Tapatalk

I'm actually doing as we speak the Elite E2-X Ultra which is there biggest can and I made it fit infront so I can install the ADM reservoir .

So I made the ultra fit I'm positive the regular size will fit.

Alain · 02-25-2021, 08:18 PM

Quote:

Originally Posted by 20Bluezl1

I'm actually doing as we speak the Elite E2-X Ultra which is there biggest can and I made it fit infront so I can install the ADM reservoir .

So I made the ultra fit I'm positive the regular size will fit.

what did you use to mount that in the front? looks like it's mounted to the fan shroud.

20Bluezl1 · 02-25-2021, 09:01 PM

Quote:

Originally Posted by Alain

what did you use to mount that in the front? looks like it's mounted to the fan shroud.

That's correct I got the idea from MM snice I didn't want to use the thermostat bolt. The shroud is pretty strong and I believe nothing will happen to it.

ZX-10R · 04-19-2021, 12:52 PM

Nice to see someone running an Ultra, I didn't think it would fit. Any changes to to the PCV under the blower? Bigger can should allow a little more vapor flow

willzilla · 04-19-2021, 01:13 PM

Quote:

Originally Posted by 20Bluezl1

I'm actually doing as we speak the Elite E2-X Ultra which is there biggest can and I made it fit infront so I can install the ADM reservoir .

So I made the ultra fit I'm positive the regular size will fit.

Nice! I actually ordered the Ultra as well, stock power but I wanted room to grow for later. I also plan to mount up front. I ordered a couple different brackets with it to try a few mounting options. Did you have to bend the pipe or whatever that line is that runs behind the fan that would be right under where the can sits?

JSH · 05-17-2021, 11:29 AM

Since this thread is about intercooler reservoirs, I just noticed that FII sells a 12L reservoir (!). WTF?

JSH · 05-17-2021, 08:25 PM

The first thing that jumped out at me immediately after a pretty hard drive was the temperature difference between the reservoir's 102-104F fluid and engine coolant's 165-175F. I have no analysis of it but it's interesting

AZIROC · 05-17-2021, 08:46 PM

I kinda wish I jumped on the group by a while back. I may wait till either there is another one or some holiday sale.

laynlo15 · 05-18-2021, 08:55 AM

Quote:

Originally Posted by Stephen12ZL1

I have been a huge proponent for an IC reservoir as I believe it to be a necessary item. Just look under hood of any Hellcat or GT500 and you will see one. Why would GM choose to neglect this simple part and make it a complicated scenario? I can't answer that one. I had version 1 on my 2017 for 10400 miles and it performed flawlessly and I expect this one to perform the same. This is available from LSA conversion store for the LT4. Here are a few pics...no cutting or huge mess to install.

I'd recommend you change the coolant in the intercooler system to a different color coolant. I've been thru this and if you have a coolant leak you can tell which system is leaking much easier. It will save you headaches in the future if a leak does occur.

02-22-2021, 03:23 AM	#72
willzilla D3RPZILLA Drives: 2021 Camaro ZL1 a10 Join Date: Aug 2020 Location: San Antonio, TX Posts: 751 View My Garage	Does any good catch can fit with the reservoir in place? Such as the elite? Sent from my GM1917 using Tapatalk __________________ 2021 Camaro ZL1 Satin Steel w/a10/PDR/CF/Red Belts/Navigation Website: z1lla.com \| YouTube: sub.z1lla.com \| Merch: Shop & Etsy YouTube Playlists: Performance Mods \| Show Mods \| Other Mods

05-17-2021, 11:29 AM	#81
JSH Drives: '20 ZLE Join Date: Jun 2020 Location: Mile High Posts: 4,148	Since this thread is about intercooler reservoirs, I just noticed that FII sells a 12L reservoir (!). WTF? __________________ 2020 ZL1LE A10. LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+:

05-17-2021, 08:25 PM	#82
JSH Drives: '20 ZLE Join Date: Jun 2020 Location: Mile High Posts: 4,148	The first thing that jumped out at me immediately after a pretty hard drive was the temperature difference between the reservoir's 102-104F fluid and engine coolant's 165-175F. I have no analysis of it but it's interesting __________________ 2020 ZL1LE A10. LME LT4 390 short block, CID Heads, Kong E2650, FBO. 15" conversion, Nitto 555Rii or MT ET Street R or Toyo Proxes RR. 100 octane: 1045hp/1055tq. 100 octane + Alky MAF Meth (1) 10+: Last edited by JSH; 05-17-2021 at 09:26 PM.

02-25-2021, 10:25 AM	#74
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,238	So I contacted ADM performance to see if we can get a group buy and they accepted I will ad a new thread with details.

04-19-2021, 12:52 PM	#79
ZX-10R Drives: 2019 ZL1 Riverside Join Date: Apr 2020 Location: Charlotte, NC Posts: 1,139	Nice to see someone running an Ultra, I didn't think it would fit. Any changes to to the PCV under the blower? Bigger can should allow a little more vapor flow

05-17-2021, 08:46 PM	#83
AZIROC Drives: '86 IROC-Z '18 ZL1 Join Date: Jul 2019 Location: Arizona Posts: 862	I kinda wish I jumped on the group by a while back. I may wait till either there is another one or some holiday sale.

User Name		Remember Me?
Password