01-25-2021, 09:03 PM | #1 |
Drives: 2016 2SS blue velvet w/blk stripes Join Date: Sep 2017
Location: Tulsa, OK
Posts: 43
|
285/35s on the front of a 2016SS???
i saw a shot of MMR Z28 wheels that were 20x10 +23mm with 285/35s on front. Rear had 20x11 +43mm with 305/35s. Has anyone tried this on the Gen6 to see if it rubs? The caption reads 25mm offset on the front but they only offer them in 23mm. I really dont want to use 30 aspect tires if this setup will work. Any opinions appreciated, thanks
|
01-26-2021, 05:42 AM | #2 |
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
I had them on my 17 1SS and with a 3mm spacer then it puts them out to 20mm and no rubbing, things were real close but no rubbing, I hope this helps.
|
01-26-2021, 07:07 AM | #3 |
Drives: 2013 C6Z06 Join Date: Nov 2016
Location: PA
Posts: 1,577
|
This is a Goodyear Supercar 3R in 285/35/20 on the front of a Mag Ride 2016 SS on a 23mm offset MRR M017 WITH a 12mm spacer. (Effective offset of 11mm) They would clear with less spacer but this was a test fit to run these on the track so I used my big spacer for more clearance.
__________________
Old Ride: 2016 Callaway SC630 Camaro SS
|
01-26-2021, 04:55 PM | #4 |
Drives: 2016 Camaro SS Join Date: Oct 2020
Location: AR
Posts: 17
|
I'm planning on going with 275/35 and 315/30 on my Mrr M017 wheels.
Very close in diameter to the stock SS diameters, and verified by a few as to not rub. |
01-26-2021, 06:01 PM | #5 | |
Drives: 2016 2SS blue velvet w/blk stripes Join Date: Sep 2017
Location: Tulsa, OK
Posts: 43
|
Quote:
|
|
01-26-2021, 06:02 PM | #6 |
Drives: 2016 2SS blue velvet w/blk stripes Join Date: Sep 2017
Location: Tulsa, OK
Posts: 43
|
|
01-26-2021, 06:03 PM | #7 |
Drives: 2016 2SS blue velvet w/blk stripes Join Date: Sep 2017
Location: Tulsa, OK
Posts: 43
|
|
|
|
Post Reply
|
Tags |
285s, front tire offset, gen6 wheels |
|
|