Exhaust Pops crackles 16-18 - Page 3

Reddy1LE · 02-06-2020, 05:46 AM

This would be only accessible through hptuners? The last time I used tuning software was with my tactrix cable & ecuflash from the evo days...

KingLT1 · 02-12-2020, 09:14 AM

Yes HPtuners and EFI live are the only 2 consumer tuning/scanning software platforms worth a shit for GM.

JANNETTYRACING · 02-12-2020, 01:57 PM

What in the hell is with all this fascination over popping it sounds like XXXX

I want to completely eliminate it, nothing sounds better than a clean snarl on decel.

Booher · 04-25-2020, 07:18 PM

So i decided to finally disable the dfco to see how it sounded. But my screen looka much different than the one shown, does anyone know why? Im a 17, and dont want to mess with the timing.

Trochoidal · 04-25-2020, 09:54 PM

Quote:

Originally Posted by Booher

So i decided to finally disable the dfco to see how it sounded. But my screen looka much different than the one shown, does anyone know why? Im a 17, and dont want to mess with the timing.

Looks like you’re in basic view. Go to edit select view and than select advanced.

Booher · 04-26-2020, 11:16 AM

Oh good call, that was it, I changed both rpms to 8k and writing the file now. Thankyou for your help, as always. Fingers crossed it works and i didnt mess anything up

Trochoidal · 04-26-2020, 02:04 PM

You’re welcome! I’d bet 99.9 to 1 that you’ll have no issues.

Booher · 04-26-2020, 10:32 PM

You are correct, it worked perfectly! Im gonna give it a week, but im not sure if i like it. I thought it would pop more, buts its more of a gurgle.

MakCamaro · 12-21-2020, 01:00 PM

So, was it worth it? Any feedback?

Chrome383Z · 12-22-2020, 08:24 AM

Quote:

Originally Posted by JANNETTYRACING

What in the hell is with all this fascination over popping it sounds like XXXX

I want to completely eliminate it, nothing sounds better than a clean snarl on decel.

I’m with you. If anything I want to get it tuned to remove it.

arpad_m · 12-22-2020, 09:32 AM

Quote:

Originally Posted by Chrome383Z

I’m with you. If anything I want to get it tuned to remove it.

He can certainly help you if you get stuck or are afraid to mess with the tables displayed above.

MakCamaro · 12-26-2020, 05:53 AM

So I am planning to modify the min spark tables by doing the following: Instead of copying-pasting the whole top 3 rows of the 2019 table, I will reduce the timing in the Minimum Spark Base and Long Term to 5 degrees in the .04, .08 and .12 rows, as this is where I want the pops on decel. If 5 degrees of timing makes the popping rather aggressive, I will increase the timing values from there to fine tune the amount of pops and crackles.

This is what I will do:

Engine>Spark>Minimum Spark> Base and Long Term (Both tables)

First I will change 0.04 to 0.12 airmass rows by 2000 to 3100 columns to 5.00. I will go higher or lower in the RPM to suit my needs and also go lower or higher with the number to make more or less aggressive pops respectively. I 've been told not to go over 0.12 airmass rows.

I will try with DFCO enabled and then disabled, to see how it sounds and if disabling it affects drivability, deceleration and fuel consumption (not that I care). I will disable as geaux_tigerss suggested in post #23.

By the way, does anyone have the file in the first post of this thread? The link is not functional anymore. Thanks!

Nitronut · 12-26-2020, 09:16 PM

Quote:

Originally Posted by JANNETTYRACING

What in the hell is with all this fascination over popping it sounds like XXXX

I want to completely eliminate it, nothing sounds better than a clean snarl on decel.

QFT!!!

cmcmro · 01-25-2021, 01:36 PM

What are you guys using to tune? I'm new to this and would love to get into it
Currently running straight through mufflers and a custom fabricated H-pipe and I'm getting wonderful gurgles on a stock tune, but I would love for them to be louder

02-06-2020, 05:46 AM	#29
Reddy1LE Drives: 1SS 1LE Join Date: Mar 2018 Location: NY Posts: 183	This would be only accessible through hptuners? The last time I used tuning software was with my tactrix cable & ecuflash from the evo days... __________________ What this car really needs is a notification eliminator. There's a wi-fi notification. Bluetooth notification. Parking brake disabled notification. Always some annoying notification popping up. - Navigator post

02-12-2020, 09:14 AM	#30
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 7,665	Yes HPtuners and EFI live are the only 2 consumer tuning/scanning software platforms worth a shit for GM. __________________ 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel

02-12-2020, 01:57 PM	#31
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,453	What in the hell is with all this fascination over popping it sounds like XXXX I want to completely eliminate it, nothing sounds better than a clean snarl on decel. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

04-25-2020, 07:18 PM	#32
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 1,135	So i decided to finally disable the dfco to see how it sounded. But my screen looka much different than the one shown, does anyone know why? Im a 17, and dont want to mess with the timing. Attached Images

04-26-2020, 02:04 PM	#35
Trochoidal Drives: 2017 Camaro 2SS A8 Join Date: May 2019 Location: USA Posts: 1,656	You’re welcome! I’d bet 99.9 to 1 that you’ll have no issues. __________________ Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“

04-26-2020, 11:16 AM	#34
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 1,135	Oh good call, that was it, I changed both rpms to 8k and writing the file now. Thankyou for your help, as always. Fingers crossed it works and i didnt mess anything up

04-26-2020, 10:32 PM	#36
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 1,135	You are correct, it worked perfectly! Im gonna give it a week, but im not sure if i like it. I thought it would pop more, buts its more of a gurgle.

12-21-2020, 01:00 PM	#37
MakCamaro Makis Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019 Location: London - UK Posts: 819	So, was it worth it? Any feedback?

12-26-2020, 05:53 AM	#40
MakCamaro Makis Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019 Location: London - UK Posts: 819	So I am planning to modify the min spark tables by doing the following: Instead of copying-pasting the whole top 3 rows of the 2019 table, I will reduce the timing in the Minimum Spark Base and Long Term to 5 degrees in the .04, .08 and .12 rows, as this is where I want the pops on decel. If 5 degrees of timing makes the popping rather aggressive, I will increase the timing values from there to fine tune the amount of pops and crackles. This is what I will do: Engine>Spark>Minimum Spark> Base and Long Term (Both tables) First I will change 0.04 to 0.12 airmass rows by 2000 to 3100 columns to 5.00. I will go higher or lower in the RPM to suit my needs and also go lower or higher with the number to make more or less aggressive pops respectively. I 've been told not to go over 0.12 airmass rows. I will try with DFCO enabled and then disabled, to see how it sounds and if disabling it affects drivability, deceleration and fuel consumption (not that I care). I will disable as geaux_tigerss suggested in post #23. By the way, does anyone have the file in the first post of this thread? The link is not functional anymore. Thanks!

01-25-2021, 01:36 PM	#42
cmcmro Drives: 2019 Camaro 3.6 RS Join Date: Sep 2020 Location: US Posts: 1	What are you guys using to tune? I'm new to this and would love to get into it Currently running straight through mufflers and a custom fabricated H-pipe and I'm getting wonderful gurgles on a stock tune, but I would love for them to be louder

User Name		Remember Me?
Password