Recommendation for a shop in SE Florida

zx9rmal · 12-28-2020, 07:33 AM

Anyone know of some shops here in SE Florida that have a strong reputation for mod installs and tuning, e.g., pulley and headers?

Thanks.

Gary Frank · 12-28-2020, 07:50 AM

send the car to vengeance racing in cumming ga. they are the best at least east of the mississipi. 678-513-7105. any questions check website, Its self explanatory.

Jits · 12-28-2020, 07:51 AM

I’m in Fort Lauderdale too. I use the guys that were Lashway at one point. The head mechanic and tuner are now at different spots, but still work together. Send me a pm, I can link you up if you want. They’re currently working on mine...a 416 cube LT4 with a procharger. But I’ve had them do work on several of my cars, and always been happy.

Z OH 6 · 12-28-2020, 08:04 AM

Quote:

Originally Posted by Gary Frank

send the car to vengeance racing in cumming ga. they are the best at least east of the mississipi. 678-513-7105. any questions check website, Its self explanatory.

Agreed.

LT4Greg · 12-28-2020, 08:20 AM

Agree too even though I haven’t had any work done by Vengence. I know several people where I live that have had their cars done there and were satisfied with the work. Vegence will even come pick up your car and deliver back to you when they are done working on it.

IneedAZ · 12-28-2020, 08:34 AM

Only shop I know in that area is Redline Performance. They are not cheap, but I am told they do decent work. They were a little too pricey for my job, but yours is a lot less work.

Frankzl1 · 12-28-2020, 08:38 AM

I have used Redline Motorsports in the past, they were good.

https://www.redline-motorsports.net/

gaveup · 12-28-2020, 09:01 AM

D.S. Motorsports in Davie did my pulley/headers install.

Owners name is Nick and I have known him for a while. Quality work with a good turn around time.

zx9rmal · 12-28-2020, 09:39 AM

Thanks guys. I've been to Redline for a dyno session. I've inquired about their pulley package and it wasn't cheap.

I'm used to when I had a GTI. A flash, a downpipe, and a CAI yields + 60 hp and +124 lbs tq, for under $1500, installed. That's under $25/ hp and $11/ lb of torque. Most of the packages I've seen are well over $50/ hp.

If I used Vengeance I'd probably drive up and have it done.

gaveup · 12-28-2020, 11:05 AM

Quote:

Originally Posted by zx9rmal

Thanks guys. I've been to Redline for a dyno session. I've inquired about their pulley package and it wasn't cheap.

I'm used to when I had a GTI. A flash, a downpipe, and a CAI yields + 60 hp and +124 lbs tq, for under $1500, installed. That's under $25/ hp and $11/ lb of torque. Most of the packages I've seen are well over $50/ hp.

If I used Vengeance I'd probably drive up and have it done.

I dont think vengance would be any cheaper than redline.

I think the cost for pulley, ati balancer, TSP headers, catless connection pipes, ARP crank bolt, crank seal, green belt, tune, plugs and wires was around $3000.

Z OH 6 · 12-28-2020, 11:08 AM

Quote:

Originally Posted by zx9rmal

Thanks guys. I've been to Redline for a dyno session. I've inquired about their pulley package and it wasn't cheap.

I'm used to when I had a GTI. A flash, a downpipe, and a CAI yields + 60 hp and +124 lbs tq, for under $1500, installed. That's under $25/ hp and $11/ lb of torque. Most of the packages I've seen are well over $50/ hp.

If I used Vengeance I'd probably drive up and have it done.

The LT4 engine is considerably more expensive to modify than many other performance cars.

zx9rmal · 12-28-2020, 11:08 AM

Quote:

Originally Posted by gaveup

I dont think vengance would be any cheaper than redline.

I think the cost for pulley, ati balancer, TSP headers, catless connection pipes, ARP crank bolt, crank seal, green belt, tune, plugs and wires was around $3000.

I assume that's without install, according to the price on the Vengeance site.

gaveup · 12-28-2020, 11:27 AM

Quote:

Originally Posted by zx9rmal

I assume that's without install, according to the price on the Vengeance site.

That was my price installed and tuned from the shop I listed above in Davie, FL.

Schlok · 12-28-2020, 11:46 AM

Quote:

Originally Posted by zx9rmal

I assume that's without install, according to the price on the Vengeance site.

Those prices are for an installed package at Vengeance racing. I used them for my Z/28, awesome shop.

12-28-2020, 07:33 AM	#1
zx9rmal Drives: '20 ZL1 M6 Join Date: Apr 2017 Location: FT. Lauderdale, FL Posts: 731	Recommendation for a shop in SE Florida Anyone know of some shops here in SE Florida that have a strong reputation for mod installs and tuning, e.g., pulley and headers? Thanks. __________________ Mal Ft. Lauderdale, FL '20 Camaro ZL1 M6 '22 Kawasaki ZX-14R

12-28-2020, 08:20 AM	#5
LT4Greg Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016 Location: Georgia Posts: 5,869	Agree too even though I haven’t had any work done by Vengence. I know several people where I live that have had their cars done there and were satisfied with the work. Vegence will even come pick up your car and deliver back to you when they are done working on it. __________________ ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.

12-28-2020, 08:34 AM	#6
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,111 View My Garage	Only shop I know in that area is Redline Performance. They are not cheap, but I am told they do decent work. They were a little too pricey for my job, but yours is a lot less work. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

12-28-2020, 09:39 AM	#9
zx9rmal Drives: '20 ZL1 M6 Join Date: Apr 2017 Location: FT. Lauderdale, FL Posts: 731	Thanks guys. I've been to Redline for a dyno session. I've inquired about their pulley package and it wasn't cheap. I'm used to when I had a GTI. A flash, a downpipe, and a CAI yields + 60 hp and +124 lbs tq, for under $1500, installed. That's under $25/ hp and $11/ lb of torque. Most of the packages I've seen are well over $50/ hp. If I used Vengeance I'd probably drive up and have it done. __________________ Mal Ft. Lauderdale, FL '20 Camaro ZL1 M6 '22 Kawasaki ZX-14R

12-28-2020, 07:50 AM	#2
Gary Frank Drives: 07 Vette 19 Camaro92 350 S10 Join Date: Nov 2019 Location: Dallas,Ga. Posts: 20 View My Garage	send the car to vengeance racing in cumming ga. they are the best at least east of the mississipi. 678-513-7105. any questions check website, Its self explanatory.

12-28-2020, 07:51 AM	#3
Jits Drives: 2017 Camaro ZL1 Join Date: Oct 2020 Location: West Palm Beach, FL Posts: 16	I’m in Fort Lauderdale too. I use the guys that were Lashway at one point. The head mechanic and tuner are now at different spots, but still work together. Send me a pm, I can link you up if you want. They’re currently working on mine...a 416 cube LT4 with a procharger. But I’ve had them do work on several of my cars, and always been happy.

12-28-2020, 08:38 AM	#7
Frankzl1 Drives: 2012 Ashen ZL1 Join Date: Nov 2011 Location: Miami Posts: 554	I have used Redline Motorsports in the past, they were good. https://www.redline-motorsports.net/

12-28-2020, 09:01 AM	#8
gaveup Drives: 2019 Camaro ZL1 M6 Join Date: Nov 2018 Location: Fort Lauderdale, FL Posts: 87	D.S. Motorsports in Davie did my pulley/headers install. Owners name is Nick and I have known him for a while. Quality work with a good turn around time.

User Name		Remember Me?
Password