You are browsing camaro6 
12-24-2020, 12:16 PM
|
#1 |
 
Drives: 2016 Camaro SS 6MT Join Date: Dec 2017
Location: Orange County, CA United States
Posts: 33
|
Fuse 51 Exhaust Keeps Blowing
Hi, per the title everytime I put in a new fuse to control the NPP valves (Fuse 51) it works for a bit until I pass 2k RPM's and then it blows. Any ideas on how to fix this? Thanks!
__________________
'16 Camaro SS 6MT
|
|
|
|
12-24-2020, 04:16 PM
|
#2 |
|
USCG Retired (MKC)
Drives: 2018 2SS 1LE Black Join Date: Aug 2018
Location: Cape Cod
Posts: 679
|
I would start with unplugging the actuators and see if the problem continues (wiring harness/BCM), if it's OK plug them back in one at a time and test again.
Last edited by Warrior102; 12-24-2020 at 05:13 PM. |
|
|
|
|
12-24-2020, 04:46 PM
|
#3 | |
|
Two Lane Blacktop
Drives: '18 Camaro 2SS Join Date: Jul 2019
Location: Black River, NNY
Posts: 516
|
My guess right along the lines of @warrior102 is one or both are stuck. Once it’s energized that circuit is trying to close or open and since it can’t, it overheats and then pops the fuse
__________________
Quote:
|
|
|
|
|
|
12-31-2020, 11:42 PM
|
#4 |
|
Drives: 2016 Camaro SS 6MT Join Date: Dec 2017
Location: Orange County, CA United States
Posts: 33
|
thank i have a borla catback coming in and will have my muffler shop check out the actuators!
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
