![]() |
#1 |
![]() Drives: 2019 camaro 2ss Join Date: Feb 2020
Location: PA
Posts: 249
|
Anyone running 325s?
What wheel\tire specs are you guys running to fit 325s nicely? just got my car back making 600whp, ordering new wheels\tires in the next few days and need some help with fitment numbers, would love to see examples if anyone has a similar setup! not set on the front specs so give me your input!
__________________
2.9 Whipple, CSP longtubes, borla atak, lt4 fueling, dsx aux pump, big gulp, nw 103mm, zl1 rep wheels, Toyo r888r
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,751
|
I'm running 275/35/20 front and 315/30/20 rear on 1LE wheels (10" wide front, 11" rear), which is a near perfect ratio match for the standard 2SS. Depending on what your main goal is, you can go 285/35/20 front and 325/30/20 and retain the match, but then you'll need small spacers.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
![]() |
![]() |
![]() |
#3 |
![]() ![]() ![]() ![]() ![]() Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Denver
Posts: 1,620
|
Apex has direct fit wheels for the 6th Gen. 11"F 12"R.
I run 305/325 19" with them. https://www.apexraceparts.com/shop-b...aro-wheel.html
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,641
|
4S 305/325 ZR3019
__________________
'20 ZL1 1LE A10.
LME 390, E2650, FBO, 100 oct. 1116/967. 1.35/9.25/151 at 3500 ft. (only one pass) 15" conversion/MT ET Street R 325/50R15. |
![]() |
![]() |
![]() |
#5 | |
![]() Drives: 2019 camaro 2ss Join Date: Feb 2020
Location: PA
Posts: 249
|
Quote:
I actually might go with these wheels Do you have pictures? any rubbing issues
__________________
2.9 Whipple, CSP longtubes, borla atak, lt4 fueling, dsx aux pump, big gulp, nw 103mm, zl1 rep wheels, Toyo r888r
|
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I’m running 295/30/20 front and 325/30/20 rear. Wheels are 20x10 front and 20x11.5 rear.
|
![]() |
![]() |
![]() |
#7 |
![]() Drives: 2017 1SS 1LE Join Date: Aug 2017
Location: New Jersey
Posts: 391
|
These cars are all the same in the rear - a ZL1 1LE rear wheel runs a 325 stock. Get a wheel that matches that fitment and it'll bolt up.
__________________
www.facebook.com/1lap1le
2017 1SS 1LE - 663 whp/623 wtq Rotofab/Whipple/Kooks 2"/LT5 TB/LT4 Fueling/E85/MCS Coilovers/Ground Control/GOODAero/Apex Wheels/Race Louvers |
![]() |
![]() |
![]() |
#8 |
![]() Drives: 2019 camaro 2ss Join Date: Feb 2020
Location: PA
Posts: 249
|
But the zle is running 11 inch wheels up front which I don’t think I can do on the ss
__________________
2.9 Whipple, CSP longtubes, borla atak, lt4 fueling, dsx aux pump, big gulp, nw 103mm, zl1 rep wheels, Toyo r888r
|
![]() |
![]() |
![]() |
#9 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,847
|
325 isn't going to do any better then a 305 or 315 with the right compound for the job. Put a 305 or 315 555r2 on it if you want better traction.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
![]() |
![]() |
![]() |
#10 | |
![]() ![]() ![]() ![]() ![]() Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Denver
Posts: 1,620
|
Quote:
No spacer required. No rubbing. They are ZLE widths, but the wheel offsets are changed since the DSSV's on the ZLE are thinner. You may want longer studs. Not required since you aren't running a spacer. Apex can sell you the ARP kit when you buy the wheels.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
|
![]() |
![]() |
![]() |
#11 | |
![]() ![]() ![]() ![]() ![]() Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Denver
Posts: 1,620
|
Quote:
Ugh. I wouldn't wish a Nitto on my worst enemy. Unless it was DR. Nitto makes a decent streetable DR.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
|
![]() |
![]() |
![]() |
#12 |
![]() Drives: 2019 camaro 2ss Join Date: Feb 2020
Location: PA
Posts: 249
|
What tires are you running? I’m using ps4s now but was thinking about 888r’s
__________________
2.9 Whipple, CSP longtubes, borla atak, lt4 fueling, dsx aux pump, big gulp, nw 103mm, zl1 rep wheels, Toyo r888r
|
![]() |
![]() |
![]() |
#13 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,847
|
I believe I suggested the 555r2. That is Nittos latest drag radial and it drives as well as a good street tire but with a lot more traction.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
![]() |
![]() |
![]() |
#14 |
![]() Drives: 2019 camaro 2ss Join Date: Feb 2020
Location: PA
Posts: 249
|
Do you think I’d be able to fit a 345/30/19 555r2 on a 19x12 apex arc 8 wheel?
__________________
2.9 Whipple, CSP longtubes, borla atak, lt4 fueling, dsx aux pump, big gulp, nw 103mm, zl1 rep wheels, Toyo r888r
|
![]() |
![]() |
|
|
Post Reply
|
|
|