10-14-2020, 09:12 PM | #1 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,474
|
Who is interested in two peice rear rotors?
If we get 5 of us together Ken@KNS will get these produced!
|
10-14-2020, 10:17 PM | #2 |
Drives: '18 SIM 1LE '16 NRB Z06 '21 C8 Z51 Join Date: Mar 2011
Location: MA
Posts: 134
|
Price ?, weight ? and operating parking brake info then I'm interested!
|
10-15-2020, 09:02 AM | #3 |
Drives: 2017 1SS 1LE Join Date: Jun 2016
Location: Detroit, MI
Posts: 1,001
|
Ditto, would also want to see this info before knowing if I'd be interested.
__________________
2017 SS 1LE.
|
10-15-2020, 10:11 AM | #4 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
FYI - RacingBrake makes them with aluminum hats and steel insert for the e-brake vs. having just the aluminum for the drum-in-hat e-brake shoes. They have them in J6M / 340mm SS 1LE (PN 2505), J6H / 365mm ZL1 (PN 2140), and J57 / 390mm Z28 size (but steel ring) (PN 2382).
Not cheap. Way (way) more than the dirt cheap stock one-piece rotors in either J6M or J6H flavor. |
10-15-2020, 10:23 AM | #5 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,846
|
im down how much?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
10-15-2020, 02:06 PM | #6 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,474
|
Ken please chime in.
|
10-15-2020, 09:34 PM | #7 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
|
If they can use stock hats would be awesome as well.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
10-16-2020, 05:58 PM | #8 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
|
10-16-2020, 08:24 PM | #9 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
|
Not on Z28’s. Both 5th, 6th, and C7 use the same diameter rear rotor, I scored a set of Z28 rear hats that Im going to use.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
10-16-2020, 09:49 PM | #10 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,474
|
|
10-17-2020, 04:29 AM | #11 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
I was talking Gen 6. Currently, I have RacingBrake two piece 390mm steel rears on my car. The Z28 CCB rears, like the C6 / C7 CCB J57 rears, have all steel rear hats. You can buy just the aluminum hats (with steel brake wear inserts) from RacingBrake. I bought a pair to use on rear Z28 CCB rotors for another project. The Vette hats are for M12 studs. FYI - the C6 J57 CCB rear rotor is only 380mm. The C7 is 390mm rear for CCB. The pads on C6 J57 are cut down.
|
10-17-2020, 04:40 AM | #12 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
Here’s the C6 J57 rear pad for the 380mm rotor. PN 171-1009 Delco. You can see how it’s cut down.
|
10-17-2020, 06:09 PM | #13 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
|
The Z28 rear hats are stainless and I’m just interested in thee rotor itself.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
10-20-2020, 10:49 AM | #14 |
Drives: Camaro SS 1LE Join Date: Aug 2019
Location: Cary, NC
Posts: 1
|
|
|
|
Post Reply
|
|
|