|
|
#1 |
![]() Drives: 2020 ZL1 1LE Shock 1968 Pontiac GTO Join Date: Apr 2020
Location: WA
Posts: 51
|
2020 ZL1 1LE A10 WEIGHT
Put the car on some scales today as well, always good to know the weight!
First is the car with me in it and about 3/4 tank of fuel second is just the car. Ant |
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,557
|
3891 isn't bad at all with 3/4 tank of gas. I'm impressed.
|
|
|
|
|
|
#3 |
![]() Drives: 2020 ZL1 1LE Shock 1968 Pontiac GTO Join Date: Apr 2020
Location: WA
Posts: 51
|
|
|
|
|
|
|
#4 |
|
2019 ZL1 1LE MY GOON
Drives: 1980 Z28 Big Red. Join Date: Dec 2018
Location: Stoney Creek
Posts: 2,061
|
Sounds about right. I have an Manual 1LE. This is in kg as I’m in Canada. But 3835 lbs.
Last edited by Scottyz; 02-15-2022 at 04:24 AM. |
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2024 CT5-V Blackwing Join Date: Sep 2020
Location: GA
Posts: 3,557
|
Nice, I'm going to see what I can do to trim up to 100lbs off my ZL1. I've got a Cox Racing lithium battery that weighs 9lbs, that's a good start to remove 35lbs or more right away. Then I'm going to look into some lighter forged wheels. I've got a set of Kooks headers and green cats coming, I would think those will be lighter than the stock manifolds and certainly doing away with one set of cats should save some weight. Then I've got an AWE exhaust coming, I'm hoping it will be a few lbs lighter as well.
|
|
|
|
|
|
#6 | |
![]() Drives: 2020 ZL1 1LE Shock 1968 Pontiac GTO Join Date: Apr 2020
Location: WA
Posts: 51
|
Quote:
Ant |
|
|
|
|
|
|
#7 |
![]() ![]() ![]() ![]() Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,327
|
Just weighed a 2022 M6 ZL1 1LE (PDR, full tank of gas, all other stock): 3830# with 54.5% up front, 49.4% on left side. Just FYI.
|
|
|
|
|
|
#8 |
|
Banned
Drives: Faster than yours Join Date: Nov 2021
Location: Earth
Posts: 288
|
Windshield wiper arms and motor are good for about 10-12 pounds. Windshield washer fluid reservoir another 6-8 pounds. Rear seat delete is 30-ish pounds.
|
|
|
|
|
|
#9 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 10,138
|
Not bad what have you done to lose some weight or is that factory?
__________________
|
|
|
|
|
|
#10 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 4,195
|
I believe mine with 2 gal. weighs 3725 with pass. seat., at the strip with Mickey's / F14 it weighs less than 3700
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO. 15" conversion, MT ET Street R 325/15. 100 octane: 1045hp/1055tq. 100 octane + Meth (1x10+): 1117 hp/1067 tq Last edited by JSH; 01-27-2022 at 04:56 PM. |
|
|
|
|
|
#11 |
![]() ![]() ![]() ![]() Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,327
|
Rear seat base on ZL1 1LE (with out the regular latch mechanism plus less dense foam than regular ZL1 and SS) was 11# and the seat back was 13.4#. I think my SS 1LE were about 31# for both.
|
|
|
|
|
|
#12 |
|
Banned
Drives: Faster than yours Join Date: Nov 2021
Location: Earth
Posts: 288
|
If you include the seat belt brackets and seat belt itself you'll get ~30# on the ZLE. I've weighed mine when I removed them.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|