Stock 18 SS with TVS2650 - 728 RWHP - Page 4

laynlo15 · 09-11-2020, 10:26 PM

I think its going to happen in December plus by then who knows what you'll come up with to improve on what you have already accomplished.

*radz28* · 09-12-2020, 07:43 AM

I just got the email from Mike's website about this system. That's pretty cool. I'm looking forward to seeing more information down the road for more applications.

laynlo15 · 09-12-2020, 08:06 AM

Mike has made sure everything is 1st class at a good price. He and Jr have been working hard and looks like it paying off. He always sends me texts on progress they are making.

gtfoxy · 09-12-2020, 08:20 AM

Very nice!

KingLT1 · 09-12-2020, 10:18 AM

Will this work for the Whipple?

ZO6Ted · 09-12-2020, 10:43 AM

I'm trying to wait on this too. My TrickTurbo twins kit arrived this week but it'll be a process. Haven't even opened the boxes yet. I would jump though if available for my application if not guess I'm doing CR.

laynlo15 · 09-12-2020, 11:13 AM

It should at some since there is more clearance on each side of the blower at the valve cover.

*Joshinator99* · 09-12-2020, 12:32 PM

Quote:

Originally Posted by KingLT1

Will this work for the Whipple?

Quote:

Originally Posted by laynlo15

It should at some since there is more clearance on each side of the blower at the valve cover.

I actually asked him that via PM yesterday and he said they're also working on a kit for the Maggie 2300, and that kit would likely work with the Whipple. Sounds like the 2650 kit works because the coil packs are relocated with that blower, so he wants to do a slightly different kit for the 2300/Whipple setups.

laynlo15 · 09-12-2020, 02:22 PM

Good to know and I hadn't talked to him about that yet so guess I should have said maybe it might work.

*Joshinator99* · 09-12-2020, 02:43 PM

Quote:

Originally Posted by laynlo15

Good to know and I hadn't talked to him about that yet so guess I should have said maybe it might work.

The sooner the better! I'd be great to have a simple PI system that rocks but doesn't cost an arm and a leg.

KingLT1 · 09-12-2020, 05:35 PM

Yes I agree...Thanks for the info!

laynlo15 · 09-12-2020, 07:23 PM

Guess I'll have to fly out and help him since I don't work anymore. Early retirement.

*Joshinator99* · 09-12-2020, 08:19 PM

Quote:

Originally Posted by laynlo15

Guess I'll have to fly out and help him since I don't work anymore. Early retirement.

Please do! There’s an extra Ben Franklin or two in it for you if I get the first Whipple-compatible one.

SienarSystems · 09-12-2020, 11:31 PM

Looks pretty amazing. Plates, injectors, maf controller, and dual pump in tank. If the 2650 with the plates fits under a stock (uncut) hood, I’m in. Even if it fits with the bmr motor mounts, that’s still a win.

09-12-2020, 07:43 AM	#44
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,846 View My Garage	I just got the email from Mike's website about this system. That's pretty cool. I'm looking forward to seeing more information down the road for more applications. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

09-12-2020, 10:18 AM	#47
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 7,629	Will this work for the Whipple? __________________ 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel

09-12-2020, 05:35 PM	#53
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 7,629	Yes I agree...Thanks for the info! __________________ 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel

09-11-2020, 10:26 PM	#43
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	I think its going to happen in December plus by then who knows what you'll come up with to improve on what you have already accomplished.

09-12-2020, 08:06 AM	#45
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Mike has made sure everything is 1st class at a good price. He and Jr have been working hard and looks like it paying off. He always sends me texts on progress they are making.

09-12-2020, 08:20 AM	#46
gtfoxy Account Suspended Drives: '21 Wild Cherry ZL1 Join Date: Aug 2018 Location: WI Posts: 2,082	Very nice!

09-12-2020, 10:43 AM	#48
ZO6Ted Old badass Drives: 14GMC 2.9 16GMC Turbos 2020Silv.6.2 Join Date: Mar 2020 Location: Arlington Tx Posts: 270	I'm trying to wait on this too. My TrickTurbo twins kit arrived this week but it'll be a process. Haven't even opened the boxes yet. I would jump though if available for my application if not guess I'm doing CR.

09-12-2020, 11:13 AM	#49
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	It should at some since there is more clearance on each side of the blower at the valve cover.

09-12-2020, 02:22 PM	#51
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Good to know and I hadn't talked to him about that yet so guess I should have said maybe it might work.

09-12-2020, 07:23 PM	#54
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Guess I'll have to fly out and help him since I don't work anymore. Early retirement.

09-12-2020, 11:31 PM	#56
SienarSystems Drives: ZL1 1LE Join Date: Oct 2018 Location: NYC (almost) Posts: 339	Looks pretty amazing. Plates, injectors, maf controller, and dual pump in tank. If the 2650 with the plates fits under a stock (uncut) hood, I’m in. Even if it fits with the bmr motor mounts, that’s still a win.

User Name		Remember Me?
Password