| View Poll Results: Who has experienced an oil pump failure? | |||
| 2016 or earlier |
|
25 | 14.97% |
| 2017 |
|
57 | 34.13% |
| 2018 |
|
77 | 46.11% |
| 2019 |
|
3 | 1.80% |
| 2020 |
|
4 | 2.40% |
| 2021 |
|
1 | 0.60% |
| Voters: 167. You may not vote on this poll | |||
|
Post Reply
|
|
|
Thread Tools |
|
|
#449 |
![]() Drives: 2018 ZL1 Join Date: Oct 2019
Location: Texas
Posts: 83
|
Yeah but how does a bad batch of pumps span 10 months?
__________________
2018 ZL1 A10 - Rotofab Intake, LT5 TB, TSP Headers, ATI Balancer, 9.1 Lower Pulley, JMS BAP, Flex Fuel.
|
|
|
|
|
|
#450 |
![]() Drives: Black 2019 ZL1 M6, Join Date: Sep 2019
Location: Georgia
Posts: 323
|
pretty easily. they questionable part is produced in put into production cars on the line which are then shipped to dealers. car sits on the lot till its purchased and then driven for around 2000 miles how ever long that takes the driver. then problem presents itself if there is going to be a problem so at this point you are probably at 5 to 6 months before any failures are reported. Just rough guesses but see how it can happen...
__________________
2019 Black ZL1, M6, CF Hood and Dash, Nav System, ZL1 Addons rock guards and lift points, Michelin Pilot Sport 4S, DD Smoked Marker Lights, Ceramic window tint, Gtechniq 9yr ceramic coating. JL Audio stealth box 12W6, Dyanamat trunk, Dead pedal cover, Soler TB/TC, Green Filter, Carbon-fiber Borla S-Type
|
|
|
|
|
|
#451 |
![]() ![]() ![]() Drives: 2018 ZL1 Camaro 6M Red Hot Join Date: Aug 2013
Location: Cary, NC
Posts: 1,139
|
I just had mine replaced 1 month ago, here is the part number that they used for mine.
__________________
People are a lot like slinky's: not very helpful most of the time, but they bring a smile to your face when pushed down the stairs...
|
|
|
|
|
|
#452 |
![]() Drives: 2018 ZL1 1LE Join Date: May 2019
Location: South Florida
Posts: 438
|
Not that it matters but its a little less at around 8 months. Melling made the pumps from what I read in here, and that some trucks had issues too telling me they probably had a few bad batches probably but eventually things were sorted out? Im no expert, just another armchair assumer on the internet.
__________________
Subscribe to my Youtube channel!
https://www.youtube.com/c/Junkyardspecial Will buy your GoodYear Supercar 3R Take offs! |
|
|
|
|
|
#453 |
![]() ![]() ![]() Drives: 2018 ZL-1 Join Date: Jan 2018
Location: Albuquerque
Posts: 1,000
|
|
|
|
|
|
|
#454 |
![]() Drives: CTV5 V Blackwing on order Join Date: Feb 2020
Location: East TN
Posts: 431
|
U did see the word "warranty" all over the invoice didn't you?
__________________
2022 CT5 V Blackwing with A10
2021 GMC Denali pickup with 6.2 and A10 2017 Ford Expedition |
|
|
|
|
|
#455 |
![]() ![]() ![]() Drives: 2018 ZL1 Camaro 6M Red Hot Join Date: Aug 2013
Location: Cary, NC
Posts: 1,139
|
Uh, no... The attached invoice shows Warranty...
My car is 2 years old with only 16,272 miles on it. So, definitely within the warranty period.
__________________
People are a lot like slinky's: not very helpful most of the time, but they bring a smile to your face when pushed down the stairs...
|
|
|
|
|
|
#456 |
![]() ![]() ![]() Drives: 2018 ZL-1 Join Date: Jan 2018
Location: Albuquerque
Posts: 1,000
|
I don't think you understood my question. Even though the work was paid by GM under warranty, I was wondering what the dealer would have charged him if it was a cash job. Maybe that was listed on the invoice?
|
|
|
|
|
|
#457 |
![]() ![]() ![]() Drives: 2018 ZL1 Camaro 6M Red Hot Join Date: Aug 2013
Location: Cary, NC
Posts: 1,139
|
It was not listed on the invoice. The only thing I cut off was my customer info at the top. What you see is what I got when I picked the car up.
__________________
People are a lot like slinky's: not very helpful most of the time, but they bring a smile to your face when pushed down the stairs...
|
|
|
|
|
|
#458 |
![]() ![]() ![]() Drives: 2019 ZL1 Riverside Join Date: Apr 2020
Location: Charlotte, NC
Posts: 1,139
|
I may have missed it but how do they know for sure there was no engine damage? did they run a compression check?
|
|
|
|
|
|
#459 |
![]() Drives: 2018 ZL1 Black M6 PDR Join Date: May 2017
Location: NY
Posts: 103
|
Mine went last night. 2018, Build date 8/17, 2700 miles. Been a garage car for me, plus putting it up for winters. Glad it's over. Been reading about this for months and it finally happened. Worried about driving it to far and being stuck somewhere. Was lucky and pulled into my buddies driveway. Saw the gauge at 0 and knew exactly what happened, just as everyone described. Only 1 mile from a chevy dealer and had it towed there last night. Now we wait and see.
|
|
|
|
|
|
#460 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016
Location: Georgia
Posts: 5,869
|
Good luck bmlocal!
__________________
ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.
|
|
|
|
|
|
#461 |
![]() Drives: 2018 ZL1 Black M6 PDR Join Date: May 2017
Location: NY
Posts: 103
|
Do they need to remove the engine to replace the pump?
|
|
|
|
|
|
#462 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,810
|
No, but doing it in the car isn't appreciably faster or easier than pulling the motor
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
|
|
|
|
|
|
|
|
Post Reply
|
|
|