What did you do to your 6th Gen Camaro today?! - Page 613

caSStro18 · 07-04-2020, 04:49 PM

Quote:

Originally Posted by arpad_m

There is an upgraded charging module that has higher output and supports 2017+ phones such as iphone 10+ or samsung galaxy s8/9+ etc. At $75 and with DIY install it's worth the minimal hassle.

I know many diss the wireless charging solution on the Camaro, but I find it convenient and use it all the time.

Oh, I see. I'd probably use it as well if I had it.

MartinLe · 07-04-2020, 05:25 PM

Not all 2017 ZL1's come with a PDR. I would have bought the car anyway, but I thought I had read somewhere that the PDR was offered on all '17 ZL1's

Anyhow, I bought the Pro SS model from G-Tech. It seems to work ok. Any thoughts or recommendations for other performance recorders?

camex · 07-04-2020, 10:49 PM

I installed welcome door light today.
I got a pain to find right wires but came out nice IMO

arpad_m · 07-04-2020, 11:07 PM

Quote:

Originally Posted by camex

I installed welcome door light today.
I got a pain to find right wires but came out nice IMO

That's pretty sweet, great job

RG20SS · 07-05-2020, 12:35 PM

Quote:

Originally Posted by Yellow Beast

Put ZL1 wheels on my 2SS. Always loved the look of these Hyperblack wheels.

What wicker bill is that? I have the same factory spoiler and can't make up my mind on if I want to change that factory spoiler to the blade spoiler which I REALLY like or put it on the factory one I have. I want to change to the Blade spoiler from GM from it doesn't look like it will cover the factory holes from my current spoiler. UGH... decisions lol

Yellow Beast · 07-05-2020, 03:05 PM

Quote:

Originally Posted by RG20SS

What wicker bill is that? I have the same factory spoiler and can't make up my mind on if I want to change that factory spoiler to the blade spoiler which I REALLY like or put it on the factory one I have. I want to change to the Blade spoiler from GM from it doesn't look like it will cover the factory holes from my current spoiler. UGH... decisions lol

I bought it from 3D engineering. You'll have to remove the oem spoiler, drill into it and press in rivnuts to hold the wicker bill in. Heres the link and if you put SLICKCAMARO in the coupon code box they'll give you 15% off.

https://3deengineering.com/products/...-ss-wickerbill

Paintslinger16 · 07-05-2020, 04:22 PM

Installed a used Soler TB bought off a member here, went well only one test ride in so far.

JonDaddy82 · 07-05-2020, 11:47 PM

Quote:

Originally Posted by camex

I installed welcome door light today.
I got a pain to find right wires but came out nice IMO

That’s neat, where’d you get the kid from?

camex · 07-06-2020, 01:46 AM

Quote:

Originally Posted by JonDaddy82

That’s neat, where’d you get the kid from?

https://www.ebay.com/itm/2pcs-Red-Wh...UAAOSwPypaXAfJ

MakCamaro · 07-06-2020, 03:11 AM

Which wires did you use to connect the welcome door light to? Did you have to drille a hole for the installation?

Jaystroh · 07-06-2020, 04:35 PM

Installed hideaway phone holder.

2SS Capt · 07-06-2020, 05:56 PM

Quote:

Originally Posted by Jaystroh

Installed hideaway phone holder.

Oh nice! Where did you get that???

mjoneil · 07-06-2020, 06:28 PM

switched out the rev match paddles and snapped a sunset pic yesterday

Jaystroh · 07-06-2020, 06:59 PM

Ebay, it was like 10 bucks. It came with tape adhesive but I removed it and used glue so it would be strong. It works great and it’s hidden. No dash mount or blocking the climate controls etc.. and cheap! Lol

07-04-2020, 10:49 PM	#8571
camex Drives: Sold Join Date: Sep 2016 Location: 555.63.389738 Posts: 336	I installed welcome door light today. I got a pain to find right wires but came out nice IMO Attached Images

07-05-2020, 04:22 PM	#8575
Paintslinger16 Two Lane Blacktop Drives: '18 Camaro 2SS Join Date: Jul 2019 Location: Black River, NNY Posts: 516	Installed a used Soler TB bought off a member here, went well only one test ride in so far. Last edited by Paintslinger16; 07-06-2020 at 07:42 AM.

07-06-2020, 04:35 PM	#8579
Jaystroh Drives: Camaro RS 2LT Join Date: Feb 2020 Location: Detroit Posts: 333	Installed hideaway phone holder. Attached Images

07-04-2020, 05:25 PM	#8570
MartinLe Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020 Location: OR Posts: 479	Not all 2017 ZL1's come with a PDR. I would have bought the car anyway, but I thought I had read somewhere that the PDR was offered on all '17 ZL1's Anyhow, I bought the Pro SS model from G-Tech. It seems to work ok. Any thoughts or recommendations for other performance recorders?

07-06-2020, 03:11 AM	#8578
MakCamaro Makis Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019 Location: London - UK Posts: 813	Which wires did you use to connect the welcome door light to? Did you have to drille a hole for the installation?

07-06-2020, 06:28 PM	#8581
mjoneil Drives: '17 2SS Join Date: Aug 2018 Location: MA Posts: 81	switched out the rev match paddles and snapped a sunset pic yesterday

07-06-2020, 06:59 PM	#8582
Jaystroh Drives: Camaro RS 2LT Join Date: Feb 2020 Location: Detroit Posts: 333	Ebay, it was like 10 bucks. It came with tape adhesive but I removed it and used glue so it would be strong. It works great and it’s hidden. No dash mount or blocking the climate controls etc.. and cheap! Lol

User Name		Remember Me?
Password