[Camaro_QC]

Originally Posted by CHV2SS

Hello guys, got my camaro back like 5 days ago from shop to get rear bumper repainted and it bothers me that double sided tape was used when they put back emblem. Its thick and it bothers me lol. Any suggestions? What should i use for my emblem beside double side tape?

They are held from factory using double sided tape. Maybe the shop used a thicker one. Or they didn't install it properly.

You can get the 3M double sided tape and reinstall it properly. It shouldn't look that thick in the end.

[arpad_m]

Originally Posted by Camaro_QC

They are held from factory using double sided tape. Maybe the shop used a thicker one. Or they didn't install it properly.

You can get the 3M double sided tape and reinstall it properly. It shouldn't look that thick in the end.

Having swapped out a couple badges, I don't think they use "traditional" double sided tape, their black gasket-like adhesive material feels more like butyl such as this one: https://www.mscdirect.com/product/details/33357849.

If someone only wants a thinner adhesive, though, 3M does have several VHB tapes that are 0.9-1.1mm thick. Note that the ones I've used were all dark gray and not pitch black.

[Zaqwert6]

There is actually body side molding tape, which is extremely thin and black very much like the factory.

[Soleil]

I installed the door projectors today. It’s a nice gadget.

[Jaxcam02]

Originally Posted by Soleil

I installed the door projectors today. It’s a nice gadget.

Is that a gm part?

[17rsvert]

Changed my OEM fender emblems today. Bought them on Amazon 22 bucks a pair. The old school chrome really looks great with Hyper blue and silver stripes.

[STYLO LT1]

Originally Posted by 17rsvert

Changed my OEM fender emblems today. Bought them on Amazon 22 bucks a pair. The old school chrome really looks great with Hyper blue and silver stripes.

Looks great!

[Val Walkinshaw]

Originally Posted by Soleil

Looks greate. What is it for a podi under the ignition button?

Vitesse throttle control module.

[MakCamaro]

Originally Posted by Soleil

I installed the door projectors today. It’s a nice gadget.

Is there a part number? How was the installation?

[Soleil]

Originally Posted by Jaxcam02

Is that a gm part?

No, it’s not a GM part. I had the template from Aki and send this to my projector supplier.

Originally Posted by MakCamaro

Is there a part number? How was the installation?

I will write a DIY in next few days. It’s not rocket science the only tricky part is tapping the cables.

[Soleil]

Originally Posted by Val Walkinshaw

Vitesse throttle control module.

Thank you

[CHV2SS]

Originally Posted by Camaro_QC

They are held from factory using double sided tape. Maybe the shop used a thicker one. Or they didn't install it properly.

You can get the 3M double sided tape and reinstall it properly. It shouldn't look that thick in the end.

Aight thanks

[MakCamaro]

Originally Posted by Val Walkinshaw

Vitesse throttle control module.

Are you happy with this Throttle Controller? Did you notice a real difference? Is it worth installing? I was looking at this as well.

I suppose this is the link: https://www.vitesse-motorsports.com/...6-2l-v8_15.htm

I am interested in this controller, as well as in the Soler Performance one. I suppose both work the same way. I am just interested to know the real impact on performance.

[GAFUN]

Originally Posted by MakCamaro

Are you happy with this Throttle Controller? Did you notice a real difference? Is it worth installing? I was looking at this as well.

I suppose this is the link: https://www.vitesse-motorsports.com/...6-2l-v8_15.htm

I am interested in this controller, as well as in the Soler Performance one. I suppose both work the same way. I am just interested to know the real impact on performance.

Had one on my LS3 Vette, and putting a Soler on my 1LE in a week. Yes, they make a huge difference in throttle response if you do not have a tune. My Soler unit seems nicer and is smaller.



Russ