New 6th Gen Spoiler, Checking Interest!

Hellrzr · 03-07-2020, 10:47 PM

I bought a 2019 ZL1 convertible, Upgraded to 1LE Aesthetics minus the rear wing. I bought 4 different spoilers, taking delivery of only 2 because of a wait and I changed my mind about the Anvil Notch. The 1LE has such an Aggresive apearance up front that the rear spoilers looked kinda "Dainty" in comparison. I wanted something that would accentuate the shape of the bumper insted of the deck lid tha was being covered up. Also need the camera and FM antenna to be incorporated. I could not find anyone who made anything close.
So I designed my own. It's not finished obviously, but gives a good idea of shape, coverage and angle. I will put it on the car in the morning and post up some of those pics as well. If enough people like the design I will do the mould and go from there otherwise I'll run it solo.

dgriff14 · 03-08-2020, 12:05 PM

That looks pretty cool. I’d like to see what it looks like on the car!

Hellrzr · 03-08-2020, 01:10 PM

Definetly

MANNAXMAN · 03-09-2020, 03:57 PM

Quote:

Originally Posted by Hellrzr

I bought a 2019 ZL1 convertible, Upgraded to 1LE Aesthetics minus the rear wing. I bought 4 different spoilers, taking delivery of only 2 because of a wait and I changed my mind about the Anvil Notch. The 1LE has such an Aggresive apearance up front that the rear spoilers looked kinda "Dainty" in comparison. I wanted something that would accentuate the shape of the bumper insted of the deck lid tha was being covered up. Also need the camera and FM antenna to be incorporated. I could not find anyone who made anything close.
So I designed my own. It's not finished obviously, but gives a good idea of shape, coverage and angle. I will put it on the car in the morning and post up some of those pics as well. If enough people like the design I will do the mould and go from there otherwise I'll run it solo.

Looks good. I'd consider it since it has a provision for the FM antenna that convertibles need. Can you explain what you mean by "accentuate the shape of the bumper insted of the deck lid"? Just curious since the 2016-18 rear bumper cover is different from the 2019-20 bumper cover.

Hellrzr · 03-10-2020, 12:47 PM

Quote:

Originally Posted by MANNAXMAN

Looks good. I'd consider it since it has a provision for the FM antenna that convertibles need. Can you explain what you mean by "accentuate the shape of the bumper insted of the deck lid"? Just curious since the 2016-18 rear bumper cover is different from the 2019-20 bumper cover.

Referring to the outer edge of the spoiler lip and relation to the outer edge shape of the bumper cover. So if you were looking down from straight above the rear. Except for the notch/ relief in the middle of the lip the general shape comes from the bumper. I think the facetal lines 16-18 are the same as 19-20 not counting the sweeps.

Anom1LE · 03-13-2020, 05:53 PM

Haven't been able to decide on a spoiler till now.... Count me in for one if you give production a go ahead!

03-07-2020, 10:47 PM	#1
Hellrzr Drives: 2019 stn stl gry zl1 convertible Join Date: Aug 2019 Location: San Diego,CA Posts: 23	New 6th Gen Spoiler, Checking Interest! I bought a 2019 ZL1 convertible, Upgraded to 1LE Aesthetics minus the rear wing. I bought 4 different spoilers, taking delivery of only 2 because of a wait and I changed my mind about the Anvil Notch. The 1LE has such an Aggresive apearance up front that the rear spoilers looked kinda "Dainty" in comparison. I wanted something that would accentuate the shape of the bumper insted of the deck lid tha was being covered up. Also need the camera and FM antenna to be incorporated. I could not find anyone who made anything close. So I designed my own. It's not finished obviously, but gives a good idea of shape, coverage and angle. I will put it on the car in the morning and post up some of those pics as well. If enough people like the design I will do the mould and go from there otherwise I'll run it solo. Last edited by Hellrzr; 03-08-2020 at 09:39 AM.

03-08-2020, 12:05 PM	#2
dgriff14 waddupdgriff Drives: Supercharged 2016 2LT RS Join Date: Sep 2017 Location: IG: waddupdgriff Posts: 213	That looks pretty cool. I’d like to see what it looks like on the car! __________________ 2016 Chevrolet Camaro 2LT RS • Edelbrock E-Force Stage 1 Supercharger • Custom tune by Overkill Motorsports • AFE Momentum GT Pro Dry Cold Air Intake • MBRP SS Cat Back Exhaust • iROC-z Wheels • Nitto NT555 G2 Tires (275 fronts, 305 rears)

03-13-2020, 05:53 PM	#6
Anom1LE Drives: 18' 2SS 1LE, 94' Z28 Join Date: Apr 2010 Location: Minnesota Posts: 75	Haven't been able to decide on a spoiler till now.... Count me in for one if you give production a go ahead! __________________ 2018 Camaro 2SS 1LE - 1,xxxHP D-1XH Procharged, LME 416, GPI/CID Track Attack Heads, BTR top end, Katech oil pump, Pray Tuned, Stainless Works, Anderson Composites, 13GFab, BC Forged & More 1994 Camaro Z28 - 7xxHP Nitrous Outlet Direct Port Nitrous & more, Creator of AggreSSive spoiler, Multi Magazine Featured Camaro Z28 in GMHTP, Super Chevy, Nitto, and Camaro Performers

03-08-2020, 01:10 PM	#3
Hellrzr Drives: 2019 stn stl gry zl1 convertible Join Date: Aug 2019 Location: San Diego,CA Posts: 23	Definetly

User Name		Remember Me?
Password