02-17-2020, 03:56 PM | #1 |
Drives: Black 1SS Join Date: Dec 2018
Location: Los Angeles
Posts: 103
|
How much horsepower should I expect from the following mods?
Hi guys, I‘m currently waiting on my Pray performance ported Tb and intake manifold, and I’m wondering what you guys think the following mods should make once added up
Set up will be Rotofab with the Dry filter Pray Ported stock TB and intake manifold CA cat delete pipes and secondary cat deletes And a E85 tune I went with this setup because it looked like one of the more simple and cost effective set ups. Also I don’t consider this a mod but I went with NGK 4344 Spark plugs and Granatelli performance wires, on my friends Camaro he dynoed them and picked up 4whp and 4wtq I’m not 100% expecting to gain the same but just throwing that out there. In my head I hope for around a 60-65whp gain from those mods. Just like to know what others think. |
02-17-2020, 03:58 PM | #2 |
Drives: 2017 SS 1LE HBM, 2010 SS FBO/Cam Join Date: Mar 2018
Location: Ohio
Posts: 174
|
Why don't you do headers too since you'll be tuning anyway?
__________________
|
02-17-2020, 04:16 PM | #3 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,953
|
With those same mods and a 305/30/20 555r I was running mid 11's on a non prepped surface.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
02-17-2020, 06:04 PM | #4 |
Drives: Black 1SS Join Date: Dec 2018
Location: Los Angeles
Posts: 103
|
|
02-17-2020, 06:07 PM | #5 |
Drives: Black 1SS Join Date: Dec 2018
Location: Los Angeles
Posts: 103
|
That’s all I want mid 11s and I have a set of 555rs on my 20’ 1le reps and a 17’ Racestar with a Et street R hope to run 11.5 but mines a 2017 and I haven’t had TCM unlocked yet.
|
02-19-2020, 09:04 AM | #6 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
I would say closer to 45-50rwhp
|
02-21-2020, 12:16 AM | #7 |
Drives: Black 1SS Join Date: Dec 2018
Location: Los Angeles
Posts: 103
|
I’m already tuned on E85 and the car is up 35whp from the stock baseline
I was hoping the Rotofab with the Dry Filter and the pray ported stuff would pick up another 25whp I saw on his testing he picked up over 30whp And I’ve read the CA cat deletes pick up 10-15whp so I hope for Atleast 10whp Maybe I’m being to optimistic but I hope to gain Atleast another 30whp from the rest. If I am someone let me know before I go back on the dyno for a retune and get disappointed 😂 |
02-21-2020, 08:20 AM | #8 | |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
Quote:
Are you deleting both sets of cats? |
|
02-21-2020, 08:49 AM | #9 |
Drives: 2001Camaro Z28 Join Date: May 2009
Location: eubank KY
Posts: 250
|
id like to do something similar to this setup.
|
02-21-2020, 08:53 AM | #10 |
Wanted to go this route but it would eat at me wondering how much HP is left on the table with going the cat delete route over headers. E85 and tuning alone would have you in 430rwhp range and similar torque. I'd say 430-50rwhp after all said and done.
|
|
02-21-2020, 09:36 AM | #11 |
Drives: 2018 1SS M6 Join Date: Feb 2018
Location: Michigan
Posts: 74
|
why dont you just do headers and cat delete
|
02-21-2020, 02:23 PM | #12 |
Just for reference...
I added CAI, MSD IM, Kooks 1 7/8, Nick WIlliams 103mm TB. Got 470 on the dyno without corn.
__________________
2018 Camaro SS 1LE - 2011 370z - 2004 VW R32 - 2000 Civic Si Mods: Rotofab, Nick Williams 103mm TB, MSD IM, Kooks 1 7/8 Results: 470 hp / 447 tq |
|
02-21-2020, 03:25 PM | #13 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,325
|
IMO front cat deletes and the stock rear muffler has resonation issues on the M6. AFAIK taking all 4 off with the stock suitcase will sound terrible. Better look at my Borla 60608 thread.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
02-21-2020, 04:51 PM | #14 |
Drives: Black 1SS Join Date: Dec 2018
Location: Los Angeles
Posts: 103
|
|
|
|
Post Reply
|
|
|