[bcasurvey1]

Originally Posted by arpad_m

One option is to replace the wireless charging pad with the 1LT/1SS storage cubby, for a 100% OEM look Its part number is 84004284, just in case.

i couldn't get this part number to work?

[arpad_m]

Originally Posted by bcasurvey1

i couldn't get this part number to work?

https://www.gmpartsnow.com/oem-parts...panel-84004284

The image is wrong in almost all online catalogs, but if you choose your vehicle first and go through the categories instead of searching directly for the part number, you'll see this is the right one.

[bcasurvey1]

here ya go, and its pro-clip not pro-mount.

[bcasurvey1]

Originally Posted by arpad_m

https://www.gmpartsnow.com/oem-parts...panel-84004284

The image is wrong in almost all online catalogs, but if you choose your vehicle first and go through the categories instead of searching directly for the part number, you'll see this is the right one.

got it thx

[ProjectZL1]

I lowered mine down on the mount, wasn't hard to do. Its not cheap but holds the phone secure, out the way and at a good angle.

[flipnSara]

Saw this in an earlier post and had to order. Haven't had an issue yet and the magnet has held my Note 10 well.

[arpad_m]

Originally Posted by flipnSara

Saw this in an earlier post and had to order. Haven't had an issue yet and the magnet has held my Note 10 well.

Tempting, very tempting...

[Doc_Scott_PT]

How is the charging power for that? How do the magnets work out for your phone without damage?

Originally Posted by flipnSara

Saw this in an earlier post and had to order. Haven't had an issue yet and the magnet has held my Note 10 well.

[flipnSara]

Originally Posted by Doc_Scott_PT

How is the charging power for that? How do the magnets work out for your phone without damage?

You know, I haven't tried the wireless charging as I plug it in for waze. I'll try it today. It held my Note 10 without the included magnet, but I'm pretty sure it wasnt designed for the 1LE ride so I added the smaller magnet by taping it on for now under my thin case. It comes with a thin and thick (much stronger, probably for an ipad) magnet for your phone. I'll get pics of the magnets and report back on the charging today.

[flipnSara]

These are the two magnets that stick to your phone. A thin .4 mm and 3mm one. The thick one is no joke. The charger comes out with it when I try to pull my phone off. Don't have that issue with the thin one. It holds solid and phone comes right off. During stops i can quickly use the phone if I need to without issue.

I was not able to get wireless charging to work on my Note 10 with either magnet or no magnet. Not sure what's going on. I didn't get it for the wireless charging since I have it plugged in anyway.

[Doc_Scott_PT]

Originally Posted by flipnSara

These are the two magnets that stick to your phone. A thin .4 mm and 3mm one. The thick one is no joke. The charger comes out with it when I try to pull my phone off. Don't have that issue with the thin one. It holds solid and phone comes right off. During stops i can quickly use the phone if I need to without issue.

I was not able to get wireless charging to work on my Note 10 with either magnet or no magnet. Not sure what's going on. I didn't get it for the wireless charging since I have it plugged in anyway.

I see, well thanks for the great info! I am back and forth between this and proclip by the dash.

[mlee]

Originally Posted by HoodCheck

pro-clip center mount...somewhat covers the passenger seat heat/cool buttons, but they can still be reached even with a phone in it.

Not an issue on a 2019+ as the seats are auto heat/cooled.