09-22-2019, 09:13 PM | #1 |
@NHTFALL
Drives: 2018 Camaro 1SS 1LE Join Date: Apr 2018
Location: Los Angeles California
Posts: 26
|
Vinyl Dimensions for Bowtie
All,
I couldn't find anything online to help me cut out the vinyl for the front/rear bowtie so i measured it myself and came up with the following for anyone trying to do the same. It fits very well! I printed it out to size, and traced it onto vinyl then used a heat gun to apply it. You do need to stretch it a little. Enjoy *Dimensions are in inches https://imgur.com/7ZH0NLw
__________________
|
09-23-2019, 09:52 AM | #2 |
Drives: 08 Tiburon GS, 2018 Camaro 2.0T Join Date: Sep 2017
Location: Québec
Posts: 1,660
|
With vinyl, you're always better to go with extra, install it and then cut it to fit. That way you are sure that you won't have any section missing vinyl. Also, if you stretch it, chances are with the sun/heat it will shrink back and you won't get a perfect coverage.
So I'd use your dimension to cut a little piece with 1" extra on each side.
__________________
2018 Camaro LS | 6 spd | 2.0L turbo | Nightfall Grey | RS package | Technology Package.
--------------------- Order WDGHKX 1100 - 5/08/2018 | 3800 - 6/18/2018 2000 - 5/09/2018 | 4200 - 6/21/2018 3000 - 5/28/2018 | 5000 - 6/27/2018 6000 - 6/29/2018 |
10-13-2019, 05:25 PM | #3 | |
@NHTFALL
Drives: 2018 Camaro 1SS 1LE Join Date: Apr 2018
Location: Los Angeles California
Posts: 26
|
Quote:
__________________
|
|
|
|
Post Reply
|
Tags |
bowtie blackout, bowtie dimensions, vinyl blackout |
|
|