Homemade rear seat delete kit - Page 3

mgwilt13 · 10-08-2019, 04:57 PM

Would you consider making and selling this kit? I am in Maryland and would make the trip.

dsgbraves · 10-09-2019, 01:14 PM

How much does the factory rear seat weigh?

laynlo15 · 10-09-2019, 03:13 PM

Nice job, so you save 25 lbs or so. My rear seats weighed 28 lbs, I did something similar but doesn't look near as good as yours.

Evolvedx27 · 01-29-2020, 08:30 PM

Quote:

Originally Posted by mgwilt13

Would you consider making and selling this kit? I am in Maryland and would make the trip.

I have gotten a couple messages the past couple days. It has me thinking. Lol

Evolvedx27 · 01-29-2020, 08:31 PM

Quote:

Originally Posted by dsgbraves

How much does the factory rear seat weigh?

Top and bottom with all seat belts and hardware. 35 lbs. Seat delete weighs in at 3lbs.

Evolvedx27 · 01-29-2020, 08:33 PM

Quote:

Originally Posted by YoungFamous

Can you make me one lol

I just might if demand is high enough and I can come up with pricing. Shipping will be interesting since it's not the most durable material out there. I used this material for the most amount of weight reduction with noise canceling capabilities also.

Evolvedx27 · 01-29-2020, 10:01 PM

If people are interested just PM me. If I get enough inquiries I will strongly consider making and selling as ordered. I am also gonna take this idea and apply it to the hellcat forums and see what happens.

Firecaptain · 02-11-2020, 06:01 PM

You might consider going to kinkos and having them copy your template and sell paper templates for those that want to make their own.

Quote:

Originally Posted by Evolvedx27

If people are interested just PM me. If I get enough inquiries I will strongly consider making and selling as ordered. I am also gonna take this idea and apply it to the hellcat forums and see what happens.

RLNTLSS · 02-11-2020, 07:47 PM

Template is good idea

carguy55 · 02-23-2020, 12:20 PM

Quote:

Originally Posted by Evolvedx27

I just might if demand is high enough and I can come up with pricing. Shipping will be interesting since it's not the most durable material out there. I used this material for the most amount of weight reduction with noise canceling capabilities also.

Did you use any special hardware or fasteners for the install?

Rhobz · 02-24-2020, 01:47 PM

I am tempted to do something similar but I have to make it load bearing. I am the new owner of a 2018 SS 1LE and the back seat is strictly going to be my dog carrier but I don't really want his claws (and a rare vomit situation) to destroy the actual seats so I am thinking of making my own kit.

Great job! Looks awesome!

kropscamaro16 · 10-06-2020, 02:35 PM

you still making/selling these?

ste6000 · 10-06-2020, 03:07 PM

Quote:

Originally Posted by Evolvedx27

Made templates out of cardboard. Made the kit out of exterior house insulation. Very light weight. Durable enough. 1/2 inch thick. Can't throw anything on back seat like you can the shrader kit but this also weighs like 3 lbs opposed to 20lbs. Costs 300 bucks less and even fits better.

man you could make this into a sellable item. i'd buy it in black so it matches the interior of my car.

Psyhamster · 10-06-2020, 04:33 PM

Quote:

Originally Posted by Firecaptain

You might consider going to kinkos and having them copy your template and sell paper templates for those that want to make their own.

I'd be in for a template. Have the same idea for creating my own backseat delete, but the template would save some time!

02-11-2020, 07:47 PM	#37
RLNTLSS INTSAGRAM: Failwish Drives: 2019 /2SS LT1 Join Date: Jun 2015 Location: Tx Posts: 232	Template is good idea __________________ 2019/LT1 2SS

10-06-2020, 02:35 PM	#40
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 10,136	you still making/selling these? __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

10-08-2019, 04:57 PM	#29
mgwilt13 Drives: 2018 RS Join Date: Sep 2016 Location: Annapolis, MD Posts: 8	Would you consider making and selling this kit? I am in Maryland and would make the trip.

10-09-2019, 01:14 PM	#30
dsgbraves Drives: 2014 zl1, 2017 Fifty SS Join Date: Jul 2017 Location: louisiana Posts: 6	How much does the factory rear seat weigh?

10-09-2019, 03:13 PM	#31
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Nice job, so you save 25 lbs or so. My rear seats weighed 28 lbs, I did something similar but doesn't look near as good as yours.

01-29-2020, 10:01 PM	#35
Evolvedx27 Drives: 2017 ZL1 Join Date: Aug 2016 Location: Long Island, New York Posts: 1,042	If people are interested just PM me. If I get enough inquiries I will strongly consider making and selling as ordered. I am also gonna take this idea and apply it to the hellcat forums and see what happens.

02-24-2020, 01:47 PM	#39
Rhobz Drives: 2018 Camaro 1SS 1LE Join Date: Feb 2020 Location: Colorado Springs, CO Posts: 186	I am tempted to do something similar but I have to make it load bearing. I am the new owner of a 2018 SS 1LE and the back seat is strictly going to be my dog carrier but I don't really want his claws (and a rare vomit situation) to destroy the actual seats so I am thinking of making my own kit. Great job! Looks awesome!

User Name		Remember Me?
Password