Edelbrock 2650 build stock setup to 1000hp - Page 11

gotswap · 10-08-2019, 07:18 AM

I have to admit, it hurt my soul a bit to cut in to the bottom of the hood.....

laynlo15 · 10-08-2019, 07:42 AM

Too bad you had to do that.

gotswap · 10-08-2019, 08:44 AM

I guess I could have used the money I saved from buying an eforce instead of a Maggie and bought a carbon fiber hood...… still have that option and would probably still have money left over.

EDFHOBBIES · 10-08-2019, 08:45 AM

Those who have the zl1 version the tuner like to tune on it just reuse that one..

EDFHOBBIES · 10-08-2019, 09:04 AM

Quote:

Originally Posted by laynlo15

Too bad you had to do that.

Saw the numbers on the zl1 1le M6 at 14 psi.. looks pretty identical to to the eforce.. lower iats or not the port injection for the win..

Cutting the hood was a hell of a lot better than coil modifications..

I doubt I would still be able to run my carbon fiber coil covers.. Dyno night would suck with out them the Queen would be naked.

jvandy50 · 10-08-2019, 09:47 AM

Quote:

Originally Posted by EDFHOBBIES

Saw the numbers on the zl1 1le M6 at 14 psi.. looks pretty identical to to the eforce.. lower iats or not the port injection for the win..

Cutting the hood was a hell of a lot better than coil modifications..

I doubt I would still be able to run my carbon fiber coil covers.. Dyno night would suck with out them the Queen would be naked.

where is the ZLE at 14psi?

EDFHOBBIES · 10-08-2019, 10:57 AM

Quote:

Originally Posted by jvandy50

where is the ZLE at 14psi?

https://www.camaro6.com/forums/showt...=562024&page=5

laynlo15 · 10-08-2019, 11:24 AM

Its a toss up. I don't remember the exact boost that's why I said 14 maybe. Sounds pretty close. The Queen would be naked? Ha I like that quote, good one.

EDFHOBBIES · 10-16-2019, 09:45 AM

Finally getting started on the port injection.. last of the goodies showed up!

EDFHOBBIES · 10-19-2019, 07:14 PM

Injectors installed..

EDFHOBBIES · 10-30-2019, 05:14 AM

MSTUNING is just about done the TSP headers I installed didn't have an extra bung for my wideband so they will weld one and start turning.

https://youtu.be/tpLZpSJ5mUo

EDFHOBBIES · 10-30-2019, 07:04 PM

I made it 1000 no meth no race fuel pump e85..

Scottyz · 10-30-2019, 07:15 PM

Very nice. Upgrade that clutch

*Joshinator99* · 10-30-2019, 07:23 PM

Nice work! Very impressive.

10-08-2019, 08:45 AM	#144
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	Those who have the zl1 version the tuner like to tune on it just reuse that one.. __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-16-2019, 09:45 AM	#149
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	Finally getting started on the port injection.. last of the goodies showed up! Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-19-2019, 07:14 PM	#150
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	Injectors installed.. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-30-2019, 05:14 AM	#151
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	MSTUNING is just about done the TSP headers I installed didn't have an extra bung for my wideband so they will weld one and start turning. https://youtu.be/tpLZpSJ5mUo __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-30-2019, 07:04 PM	#152
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	I made it 1000 no meth no race fuel pump e85.. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber

10-08-2019, 07:18 AM	#141
gotswap Drives: 2019 ZL1 Crush Join Date: Jan 2019 Location: Colorado Springs Posts: 564	I have to admit, it hurt my soul a bit to cut in to the bottom of the hood.....

10-08-2019, 07:42 AM	#142
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Too bad you had to do that.

10-08-2019, 08:44 AM	#143
gotswap Drives: 2019 ZL1 Crush Join Date: Jan 2019 Location: Colorado Springs Posts: 564	I guess I could have used the money I saved from buying an eforce instead of a Maggie and bought a carbon fiber hood...… still have that option and would probably still have money left over.

10-08-2019, 11:24 AM	#148
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	Its a toss up. I don't remember the exact boost that's why I said 14 maybe. Sounds pretty close. The Queen would be naked? Ha I like that quote, good one.

10-30-2019, 07:15 PM	#153
Scottyz 2019 ZL1 1LE MY GOON Drives: 1980 Z28 Big Red. Join Date: Dec 2018 Location: Stoney Creek Posts: 2,061	Very nice. Upgrade that clutch

10-30-2019, 07:23 PM	#154
Joshinator99 Moderator Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: New Ipswich NH Posts: 6,350	Nice work! Very impressive. __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, ATI 8L90, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors & BB HPFP, TooHighPSI/Katech port injection, 15” conversion 1066 WHP STD/1027 SAE, 9.10@152.5 (new times coming)

User Name		Remember Me?
Password