You are browsing camaro6 
09-16-2019, 07:26 PM
|
#1 |
|
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,856
|
Clicking noise from rear suspension / wheel area at low speed
Click noise when rolling from accelerating to decelerating like low to medium speed traffic like sub 30mph.
Pulled wheel off, didn't see anything that appeared loose, one of rear upper links will make clank noise if you rotate it and hit the frame bracket. Same on both sides. I didn't get chance to check if perhaps axle nut was loose since largest socket I own is 32mm - may have to get camaro sized just in case. I'll chock wheels next time and try the 5G camaro axle clank test, but manual so harder to do. Noise is click / clank like noise - like solid metal on metal sound. Scheduled service visit just in case don't solve it before then.
__________________
 ing for grip.Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
|
|
|
09-16-2019, 09:12 PM
|
#2 |
          
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,824
|
put the wheel back on and check for play in the rear bearing assembly. The large nut is 36mm and I doubt it is loose as it is dimpled on one edge.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
09-23-2019, 03:21 PM
|
#3 |
|
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,856
|
Noise is gone, appears axle nut was 1/4 turn loose per dealer. There was TSB for similar noise on 17's. Time to invest in 36mm axle socket.
__________________
ing for grip.Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
|
|
|
|
09-23-2019, 03:52 PM
|
#4 |
Drives: 2018 ZLE Join Date: Feb 2018
Location: Palm City Fl
Posts: 1,371
|
I had a Z06 that did this as well. If I remember right I put 110Lbs on each rear axle nut and it solved the problem
|
|
|
|
|
09-26-2019, 07:55 PM
|
#5 |
 
|
CLICKING
I also have noticed a clicking sound, but mine has been coming from my driver side front wheel area and it is only when I first pull off when turning right? Any of you guys experience the same?
 2017 ZL1 M6 with 3400 miles so far. Non daily driver, Garage kept |
|
|
|
|
09-26-2019, 09:13 PM
|
#6 |
|
|
FOUND IT
Found this about page 7 in. Copy and paste into your browser if clicking the link doesn't work.
 https://static.nhtsa.gov/odi/tsbs/20...82871-5448.pdf |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
