NGAUGE tuner help

soceur77 · 06-24-2019, 02:59 PM

I know theres not many with this cool little tuner, but any help at this point would be appreciated. Im only utilizing for PID viewing not to hold or download tunes.

I successfully scanned the car and set up 6 PIDS for my viewing pleasure, however 3 of the PIDS are not reading correctly.
Knock reads 0 at all times (I know my tuner is good, but not THAT good..lol
Oil pressure also reads 0 although in car gauge reads around 40 psi
Boost gauge never goes out of vacuum although a small pull up to 13psi via in car gauge said other wise.
While the car was running i inspected all 103 i believe other PIDS and each one of those PIDS did indicate some sort of static or fluid value.

Any advice would be greatly appreciated!

Swift

WhiteDevil · 08-01-2019, 10:54 PM

Did you ever figure this out?

Getnlwr · 08-02-2019, 02:52 AM

I dont know diddly squat about what you are using but the info below might help you,

The PID for oil pressure I use in the Torque Pro app is

-
PID: 22115c
Long Name: Oil Pressure PID
Short Name: Oil Pressure
Minimum Value: 0
Maximum Value: 100
Scale: x1
Unit: psi
Equation: (A*0.65)-17.5
OBD Header: Auto

The one built into the app does not work for me. However when I used the one above it did work. I found the info on another forum, and tried it on my car and it worked.

Try to enter a custom PID and use the above info.

06-24-2019, 02:59 PM	#1
soceur77 Drives: 17 NFG ZL1 17 GTR 22 RS6 Join Date: Apr 2017 Location: Upper Marlboro MD Posts: 625	NGAUGE tuner help I know theres not many with this cool little tuner, but any help at this point would be appreciated. Im only utilizing for PID viewing not to hold or download tunes. I successfully scanned the car and set up 6 PIDS for my viewing pleasure, however 3 of the PIDS are not reading correctly. Knock reads 0 at all times (I know my tuner is good, but not THAT good..lol Oil pressure also reads 0 although in car gauge reads around 40 psi Boost gauge never goes out of vacuum although a small pull up to 13psi via in car gauge said other wise. While the car was running i inspected all 103 i believe other PIDS and each one of those PIDS did indicate some sort of static or fluid value. Any advice would be greatly appreciated! Swift

08-01-2019, 10:54 PM	#2
WhiteDevil Drives: 2017 ZL1 A10 Join Date: May 2016 Location: Colorado Posts: 142	Did you ever figure this out? __________________

08-02-2019, 02:52 AM	#3
Getnlwr Drives: '21 ZL1 A10 '08 SRT10 Join Date: Apr 2019 Location: Washington Posts: 132	I dont know diddly squat about what you are using but the info below might help you, The PID for oil pressure I use in the Torque Pro app is - PID: 22115c Long Name: Oil Pressure PID Short Name: Oil Pressure Minimum Value: 0 Maximum Value: 100 Scale: x1 Unit: psi Equation: (A*0.65)-17.5 OBD Header: Auto The one built into the app does not work for me. However when I used the one above it did work. I found the info on another forum, and tried it on my car and it worked. Try to enter a custom PID and use the above info.

User Name		Remember Me?
Password