[IneedAZ]

Originally Posted by EDFHOBBIES

Coil covers xcarbon and trufiber
Carbon elite air intake or weapon x
Fuse box cover trufiber and apsisusa
Radiator cover trufiber and xcarbon
Corner covers by lights trufiber
Coolant cover trufiber

Oil lid apsisusa
Dipstick apsisusa
Lt4 blower cover apsisusa
I believe weaponx has a complete lid made of carbon

Are some of the under hood components the same as Corvette? I looked on the website and don't see Camaro listed.

[EDFHOBBIES]

Trufiber doesn't have all the inventory listed yet. Some of the vette stuff will interchange like the coil covers but on them I had to run different pcv hoses now they have direct fit.

I'm going today to pick up the fuse cover, coolant cover, and the side radiator covers and the door handle covers.

[IneedAZ]

Originally Posted by EDFHOBBIES

Trufiber doesn't have all the inventory listed yet. Some of the vette stuff will interchange like the coil covers but on them I had to run different pcv hoses now they have direct fit.

I'm going today to pick up the fuse cover, coolant cover, and the side radiator covers and the door handle covers.

I have the coolant cover and radiator support. I am looking for the fuse cover, brake cover, and washer cover still.

The parts you ordered are Real Carbon Fiber and not oem parts covered in CF, correct?

What are the side radiator covers?

[EDFHOBBIES]

Apsis will be both.. cover made of carbon or real part skinned w carbon

Trufiber will be a cover made from mould of OEM part or a direct replacement part in real carbon.

Coil covers real part of carbon
Radiator cover real part of carbon
Radiator side pieces today getting real carbon
Coolant reservoir real carbon almost identical to rotofab
Fuse box cover real replacement picking up today

Oil lid from Apsis most likely a lid that's skinned same with dip stick handle and a lt4 blower cover but says vette.. but this guy will skin or make what ever u want. He's Asian but has a name like Jerry or something

I saw 1st hand at the chevy vette show in Galveston they look pretty awesome but he is very pricey.


I have not seen a brake cover or washer cover yet..

I could try to make something of card board and see if they can offer it.

Just so happens I have a c7 at my house right now I can see if parts are interchange when I get home.

[IneedAZ]

Originally Posted by EDFHOBBIES

Apsis will be both.. cover made of carbon or real part skinned w carbon

Trufiber will be a cover made from mould of OEM part or a direct replacement part in real carbon.

Coil covers real part of carbon
Radiator cover real part of carbon
Radiator side pieces today getting real carbon
Coolant reservoir real carbon almost identical to rotofab
Fuse box cover real replacement picking up today

Oil lid from Apsis most likely a lid that's skinned same with dip stick handle and a lt4 blower cover but says vette.. but this guy will skin or make what ever u want. He's Asian but has a name like Jerry or something

I saw 1st hand at the chevy vette show in Galveston they look pretty awesome but he is very pricey.


I have not seen a brake cover or washer cover yet..

I could try to make something of card board and see if they can offer it.

Just so happens I have a c7 at my house right now I can see if parts are interchange when I get home.

Cool, thanks...My number 1 piece i want to get next is the Fuse cover. I am curious to see what the side radiator covers are that you are talking about. I can't picture it.

[IneedAZ]

Originally Posted by EDFHOBBIES

Apsis will be both.. cover made of carbon or real part skinned w carbon

Trufiber will be a cover made from mould of OEM part or a direct replacement part in real carbon.

Coil covers real part of carbon
Radiator cover real part of carbon
Radiator side pieces today getting real carbon
Coolant reservoir real carbon almost identical to rotofab
Fuse box cover real replacement picking up today

Oil lid from Apsis most likely a lid that's skinned same with dip stick handle and a lt4 blower cover but says vette.. but this guy will skin or make what ever u want. He's Asian but has a name like Jerry or something

I saw 1st hand at the chevy vette show in Galveston they look pretty awesome but he is very pricey.


I have not seen a brake cover or washer cover yet..

I could try to make something of card board and see if they can offer it.

Just so happens I have a c7 at my house right now I can see if parts are interchange when I get home.

Well, just spoke to Trufiber and no go on the Fuse cover and those side radiator covers you mentioned. They said maybe later in the year or next year.

[EDFHOBBIES]

They probably want to make sure it fits good 1st there pretty careful about just putting up parts. Some parts did take a year but the mustang project caused that. I dropped of the radiator cover, the radiator side parts 2 mos ago and coolant cover to so that was fast.

[IneedAZ]

Originally Posted by EDFHOBBIES

They probably want to make sure it fits good 1st there pretty careful about just putting up parts. Some parts did take a year but the mustang project caused that. I dropped of the radiator cover, the radiator side parts 2 mos ago and coolant cover to so that was fast.

Well, I hope those parts become avail sooner. Car shows in my area start up late September. For me the fuse cover is more important. Others have gotten these a year or two ago. I was told the guy from Metal Desire was making them, but i don't see a website for them only FB.

[SouthFloridaGTO]

Originally Posted by EDFHOBBIES

SO far I have the following from Trufiber..

ZL1 1le Splitter, Bezels, dive planes
radiator cover replacement part
side skirts
rear Diffuser being molded now
Fuse box cover
coolant cover
coil covers

Stereo cover
steering wheel 3 piece set the lower part is a replacement
GM dash insert copy
Gear shift bezel cover and replacement part available
push button start cover and replacement part
door handle cover (a replacement part will be available when i get the door panels to them)
window control cover (a replacement part will be available when i get the door panels to them)
Complete dash ( includes the silver strip and runs to the pass side)
dash bezel (silver strip around the speedo)
Complete console
pillars (with and with out gauge pod)
upper dash
glove box

I'm hoping they make the AC nozzles in carbon since they have a whole dash i brought them but I need to get them the center AC nozzles..


Here are a few pics

Those all look dope af

[Boo]

It seems there are some new CF parts offered on Phastek....From Anderson (APR)

[EDFHOBBIES]

Post pic I always looking

[EDFHOBBIES]

I have to put coolant cover on tomorrow

[IneedAZ]

Originally Posted by EDFHOBBIES

I have to put coolant cover on tomorrow

Very nice. How is the fit and quality of the fuse box cover and headlight covers? How do the headlight covers attach? Did they tell you someone asked about them today?

[EDFHOBBIES]

I need to trim the cover about 1/4 inch around the bottom to see if that corrects its. Dbl sided tape on light covers plenty strong wifes had her metal ones on for 2 years plus. I also need to trim the coolant reservoir.

It's a go on other reservoirs just need to get some for molds.