Adams Polishes Ceramic Spray 9H on the 1LE - Page 4

SSShark · 03-03-2019, 03:07 PM

I was wondering why the OP's paint color looked so enhanced, it seems that the guy is a cinematographer. My results were great but nowhere near his, makes sense now.

Ryanbabz71 · 03-03-2019, 10:25 PM

Quote:

Originally Posted by IneedAZ

Has anyone here tried it over paint protection film? Is clay and a wash the only prep if using over film?

I used over the clear film I have on the front of my car. I only have 1400 miles on the car so I didn’t really need any prep (not a DD). Sprayed on wiped off.

Ryan B.

Adam's Polishes · 03-04-2019, 02:18 PM

Quote:

Originally Posted by IneedAZ

Has anyone here tried it over paint protection film? Is clay and a wash the only prep if using over film?

You are correct.

SSShark · 03-10-2019, 04:13 PM

Here is a video of the first wash after applying. The paint is incredibly slick and hydrophobic.
https://youtu.be/ob8yEdVpQhs

Adam's Polishes · 03-11-2019, 03:06 PM

Quote:

Originally Posted by 8minus4

Here is a video of the first wash after applying. The paint is incredibly slick and hydrophobic.
https://youtu.be/ob8yEdVpQhs

That's great......Thanks!!

ss2fast4u · 03-12-2019, 09:35 AM

I have noticed with using Adams paint sealant and h20 guard and gloss I tend to get a lot of water spots after it rains from the small water pooling where the water cannot run off the car. Does the ceramic coating help that or will I most likely see the same results?

SSShark · 03-12-2019, 10:01 AM

Quote:

Originally Posted by ss2fast4u

I have noticed with using Adams paint sealant and h20 guard and gloss I tend to get a lot of water spots after it rains from the small water pooling where the water cannot run off the car. Does the ceramic coating help that or will I most likely see the same results?

You will still see very light water spots in certain areas. Especially on the flat spots, such as the trunk lid and tops of the quarters. Good thing is they wash right off!

ss2fast4u · 03-12-2019, 10:46 AM

Also this question maybe be more for Adams but the one step polish adams sells I believe has SiO2. So I assume if someone uses that before the coating that will have to be removed. May just used their standard polish prior to coating instead.

Adam's Polishes · 03-12-2019, 04:25 PM

Quote:

Originally Posted by ss2fast4u

Also this question maybe be more for Adams but the one step polish adams sells I believe has SiO2. So I assume if someone uses that before the coating that will have to be removed. May just used their standard polish prior to coating instead.

No matter what polish you use before applying CS you want to use our Coating Prep first to clean your paint.

https://adamspolishes.com/shop/exter...prep-16oz.html

03-03-2019, 03:07 PM	#43
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,503	I was wondering why the OP's paint color looked so enhanced, it seems that the guy is a cinematographer. My results were great but nowhere near his, makes sense now. __________________ Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune l GM Lowering Kit Ported LT2 Intake Manifold l Ported 95mm LT5 TB l BMR Rear Cradle Lockout Kit Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l 480whp/467wtq

03-10-2019, 04:13 PM	#46
SSShark Drives: '23 1SS Sharkskin A10 Join Date: Sep 2018 Location: South Florida Posts: 1,503	Here is a video of the first wash after applying. The paint is incredibly slick and hydrophobic. https://youtu.be/ob8yEdVpQhs __________________ Kooks 1-7/8" Long Tube Headers l Kooks Hi-Flow Cats l Kooks X-Pipe l Borla S-Type NPP Exhaust Rotofab CAI l Mishimoto Catch Can l DSX Flex Fuel Sensor l 93/E85 Tune l GM Lowering Kit Ported LT2 Intake Manifold l Ported 95mm LT5 TB l BMR Rear Cradle Lockout Kit Halo Tunnel Brace l MRR 1LE Wheels l Goodyear SC3 1LE Tire Package l 480whp/467wtq

03-12-2019, 09:35 AM	#48
ss2fast4u 2018 Camaro 1ss M6 Drives: 2018 Camaro 1SS M6/ LT4 SC Join Date: Mar 2018 Location: Connecticut Posts: 92	I have noticed with using Adams paint sealant and h20 guard and gloss I tend to get a lot of water spots after it rains from the small water pooling where the water cannot run off the car. Does the ceramic coating help that or will I most likely see the same results?

03-12-2019, 10:46 AM	#50
ss2fast4u 2018 Camaro 1ss M6 Drives: 2018 Camaro 1SS M6/ LT4 SC Join Date: Mar 2018 Location: Connecticut Posts: 92	Also this question maybe be more for Adams but the one step polish adams sells I believe has SiO2. So I assume if someone uses that before the coating that will have to be removed. May just used their standard polish prior to coating instead.

User Name		Remember Me?
Password