01-22-2017, 06:21 PM | #15 | |
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Quote:
if you are serious about upgrading to brembos... simply look in the members classifieds and buy someone's take off brembo 4 piston brakes with lines. They go about 400. All you need to buy. Even if you did buy a caliper from gm at the pice shown on the link you listed (mind you that price x 2, since you need two calipers)..., you still need the pads, the rotors, and the brake lines. Maybe the dust shields if you are frugal about exactness. Most listing in the members classified are selling all you need for around 400-450. No brainer, make it easy on yaself.
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
|
01-22-2017, 08:03 PM | #16 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
Thanks man that does help A lot. I did see someone's listing and they're willing to sell me these brembos. It comes with the calipers, brake line and bolts. What do you think about these? He claims he took them off at 400 miles do you think that's true? I feel like they're too used up to be only used for 400 miles. I was thinking about getting them then buying my own pads and rotors. Do you think it's a good idea? He lives near me also http://www.camaro6.com/forums/showthread.php?t=480983 Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
01-23-2017, 09:03 AM | #17 | |
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Quote:
If I weren't buying wilwoodS and we're gonna get the 4 piston ones, I'd get these. Yall are both close by. Went to high school in Alexandria va.
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
|
01-23-2017, 02:45 PM | #18 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
Thanks bro will do. Just had some questions. He said it comes wth the mount and brake lines but I still would need the pad pins. Where can I get them? Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
01-23-2017, 04:22 PM | #19 | |
Drives: '16 Camaro 2LT RS Join Date: Aug 2015
Location: Los Angeles, CA
Posts: 144
|
Quote:
I might also end up just doing the 6pot brembo brake kit. Still somewhat undecided
__________________
|
|
01-23-2017, 05:28 PM | #20 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
You already have the 4pot brakes on your car? Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
01-23-2017, 05:44 PM | #21 |
Drives: 16 Summit white, Ceramic white 2SS Join Date: Jan 2016
Location: Places
Posts: 419
|
lol. This guy is a trip. Thank you Polynesian for saying what I have been telling him for two days. Cant beat the price anywhere and they are super easy to put on. Don't think about it just buy them and be happy!
|
01-24-2017, 05:40 PM | #22 | |
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Quote:
but if you need to order em for whatever reason, above is the order i'd go for it. just ordered a rear 3rd brake light from Cultrag, and it took like 2-3 days direct from GM in lansing Michigan, drop shipped. local dealers MAY have it. also looking at the ad you put up, I didn't see rotors or pads. the rotors are bigger on the SS, and the pads will be difference than what you have I'm almost 100% sure... make sure you factor in those too if they aren't offered no worries, uce! were all here to help each other!
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
|
01-24-2017, 05:42 PM | #23 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
Pads I know I have to get them but lethal aka Matt was telling me the rotors can work fine with the ss brakes Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
01-24-2017, 05:53 PM | #24 | ||
Big Samoan ina little car
Drives: 2016 camaro Join Date: May 2014
Location: Tofiga Island
Posts: 1,872
|
Quote:
my two sources on that: http://www.camaro6.com/forums/showpo...16&postcount=1 and brembo themselves http://www.brembo.com/en/ComunicatiS...01%20final.pdf measure your rotor. if its somehow already 13.6 inches across the whole thing, then you wont need new rotors. if its 12.6 inches then you will...else when you pads wear, there will be about 1/3 to 1/2 of an inch of a lip that the pads never touch. don't ask me how I know about that with my old charger upgrading from the SXT V6 brakes to the R/T v8 brakes we live and we learn... also, when you buy the upgrade kit for the V6 from GM Quote:
__________________
Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N
When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant |
||
01-25-2017, 12:06 AM | #25 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
I just confirmed with Lethal and he said he has a friend that is running ss brembo stock calipers with the LT rotors. And has no problems. So idk I might just think about going some aftermarket slotted/drilled ones that are 13.6" Sent from my iPhone using Tapatalk
__________________
Well............ At least you tried. lol
|
|
02-22-2017, 06:31 PM | #26 |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Guys is there a how to installing the brake lines and bleeding the brakes?
|
01-06-2019, 02:40 PM | #27 |
Colossus_2.0
Drives: 2017 Camaro 2.0 LTG turbocharged Join Date: May 2018
Location: Houston, TX
Posts: 22
|
Sup guys , so I think I jumped the gun on this one... I recently purchased the front 6 piston brembos oem with rotors for my 2017 2.0 Camaro and then decided to do the same to rear, now after reading the post noticed that the rears won't work is that true ???
|
01-06-2019, 03:16 PM | #28 | |
Drives: 2017 2LT RS Join Date: Oct 2017
Location: Dallas, TX
Posts: 97
|
Quote:
|
|
|
|
Post Reply
|
|
|