You are browsing camaro6 
11-20-2018, 11:22 AM
|
#1 |
      
Drives: 2017 SS 1LE, 2016 1SS (previous) Join Date: Apr 2016
Location: Metro-Detroit
Posts: 1,869
|
COMP Shaft Rockers for LS
The valve/rocker geometry between LS and GenV LT engines is different, right? I thought I remember hearing the exhaust is the same, but the intake is a bit different?
https://www.lsxmag.com/features/sema...or-ls-engines/ |
|
|
|
11-20-2018, 11:38 AM
|
#2 |
Drives: All GM Performance Join Date: Jul 2011
Location: Mount Airy, NC
Posts: 337
|
The rockers on an LT engine are like LS7 rockers (1.8 ratio). But the intake rocker mount in the head is offset/twisted. So the rockers are not inline like the LS heads are.
|
|
|
|
|
11-20-2018, 12:08 PM
|
#3 | |
|
Drives: 2017 SS 1LE, 2016 1SS (previous) Join Date: Apr 2016
Location: Metro-Detroit
Posts: 1,869
|
Quote:
Would be sweet to be able to have a shaft system for the GenV's. |
|
|
|
|
|
11-20-2018, 01:03 PM
|
#4 |
|
Drives: Camaro Join Date: Sep 2018
Location: USA
Posts: 520
|
LT heads are 12.5° / Splayed 2.61° & 12.0° / Splayed 2.38°
Jesel is the only one I know of that has made 1.9 rockers for the LT heads. https://www.enginelabs.com/engine-te...on-a-pedestal/ |
|
|
|
|
11-20-2018, 10:39 PM
|
#5 |
|
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,670
|
Texas Speed makes the beat rocker setup for lt engines. Bolt on for under $600!!
|
|
|
|
|
11-20-2018, 10:59 PM
|
#6 | |
     
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 7,561
|
Quote:
__________________
 2016 NFG SS A8/Whipple 2.9/Fuel System/Flex Fuel |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
